1. Introduksjon
The Xantrex PROsine Inverter is designed to convert DC (Direct Current) power from batteries into clean, reliable AC (Alternating Current) power. This true sine wave output is identical to the AC power supplied by utility companies, making it suitable for sensitive electronic loads. It is engineered for both recreational and industrial applications, ensuring optimal performance for a wide range of AC equipment, including televisions, audio systems, and power tools.
2. Sikkerhetsinformasjon
Read all instructions and cautionary markings on the inverter, the batteries, and all appropriate sections of this manual before installation and operation. Failure to follow these instructions may result in electrical shock, fire, and/or severe injury.
- Fare for elektrisk støt: Do not open the inverter. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- Brannfare: Do not install the inverter in compartments containing flammable materials or in locations that require ignition-protected equipment.
- Batterisikkerhet: Work in a well-ventilated area. Batteries can produce explosive gases. Do not smoke or allow sparks or flames in the vicinity of the battery.
- Riktig ventilasjon: Sørg for tilstrekkelig ventilasjon rundt omformeren for å forhindre overoppheting.
- Jording: The inverter must be properly grounded.
- Overbelastningsbeskyttelse: Do not exceed the inverter's rated output power.
- Revers polaritet: Ensure correct DC input polarity. Reverse polarity connection will damage the inverter.
3. Produktfunksjoner
The Xantrex PROsine 1800 Inverter offers advanced features for reliable power conversion:
- True sine wave AC output (crystal controlled) ensures clean power for sensitive electronics.
- 1800 watt continuous power output.
- Surges to 2900 watt peak for starting demanding loads.
- Removable LCD display can be mounted remotely for convenient control and monitoring of system status.
- Unique DC terminals offer 180-degree connections, simplifying installation in confined spaces.
- Powersave mode draws only 1.5 watts under no load, conserving battery power.
- High frequency switching technology for efficient operation.
- Multi-stage charging capability.
- Integrated protection against automatic overload, short circuit, over temperature, reverse polarity, AC backfeed, and over/under input voltage.
4. Oppsett og installasjon
Proper installation is crucial for the safe and efficient operation of your PROsine Inverter. Consult a qualified electrician or installer if you are unsure about any steps.
4.1 Utpakking og inspeksjon
Carefully unpack the inverter and inspect it for any shipping damage. Report any damage to your dealer immediately.
4.2 Monteringssted
Velg et monteringssted som er:
- Dry and protected from moisture.
- Well-ventilated to dissipate heat.
- Tilgjengelig for kabling og vedlikehold.
- Nær batteribanken for å minimere lengden på likestrømskabelen.
- Away from flammable materials or gases.
The inverter can be mounted horizontally or vertically. Ensure the mounting surface is sturdy enough to support the inverter's weight (approximately 12 pounds).
4.3 DC Wiring (Battery Connection)
Connect the inverter directly to your 12V DC battery bank. Use appropriately sized, high-quality DC cables to minimize voltage drop and ensure efficient power transfer. The unique 180-degree DC terminals facilitate flexible cable routing.
- Koble den positive (+) polen på omformeren til den positive (+) polen på batteribanken.
- Koble den negative (-) terminalen på omformeren til den negative (-) terminalen på batteribanken.
- Install appropriate DC overcurrent protection (e.g., a fuse or circuit breaker) as close to the battery as possible.
4.4 AC Wiring (Output Connection)
The inverter provides 120Vac, 60Hz, 1800W AC output. Connect your AC loads to the standard duplex outlet on the inverter. For permanent installations, consult local electrical codes.
Figur 1: Foran view of the Xantrex PROsine 1800 Power Inverter. The image displays the yellow and silver casing, with the front panel featuring an LCD screen, control buttons, and two standard 120Vac, 60Hz, 1800W outlets. The Xantrex logo is visible on the top and front panel.
4.5 Remote Display Installation (Optional)
The LCD display can be removed from the unit and mounted remotely for convenient monitoring and control. Refer to the detailed instructions in the full manual for remote mounting procedures.
5. Bruksanvisning
Once properly installed, operating the PROsine Inverter is straightforward.
5.1 Slå på/av
- To turn the inverter ON, press and hold the power button on the front panel until the LCD display illuminates.
- To turn the inverter AV, press and hold the power button again until the display turns off.
5.2 LCD Display and Monitoring
The backlit LCD graphical output display provides real-time information about the inverter's operation, including:
- DC -inngang voltage (VOLTS)
- AC output power (WATTS)
- Battery charge status (if applicable)
- Error codes or warnings
Use the navigation buttons next to the display to cycle through different information screens.
5.3 Powersave Mode
The inverter features a Powersave mode that automatically reduces power consumption to only 1.5 watts when no AC load is detected. This feature helps conserve battery energy. The inverter will automatically "wake up" and provide full power when an AC load is connected.
5.4 Connecting AC Loads
Plug your AC appliances directly into the inverter's AC outlets. Ensure that the total continuous power draw of your appliances does not exceed the inverter's 1800 watt continuous rating. The inverter can handle surge loads up to 2900 watts for brief periods, typically for motor starting.
6. Vedlikehold
The Xantrex PROsine Inverter requires minimal maintenance to ensure long-term reliable operation.
- Rengjøring: Rengjør omformerens utside med jevne mellomrom med en tørr, myk klut. Ikke bruk flytende rengjøringsmidler eller løsemidler. Sørg for at ventilasjonsåpningene er fri for støv og rusk.
- Tilkoblinger: Regularly check all DC and AC connections to ensure they are tight and free from corrosion. Loose connections can cause overheating and poor performance.
- Batterivedlikehold: Follow the battery manufacturer's recommendations for battery maintenance, including checking electrolyte levels (for flooded batteries) and terminal cleanliness.
- Ventilasjon: Ensure that the area around the inverter remains clear and well-ventilated to prevent heat buildup.
7. Feilsøking
The PROsine Inverter is designed with built-in protection features. If the inverter shuts down or displays an error, refer to the following common issues:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Omformeren slår seg ikke på. | No DC input power; Low battery voltage; Blown DC fuse/breaker; Loose connections. | Sjekk batteritilkoblinger og voltage; Recharge or replace batteries; Check and replace fuse/reset breaker; Tighten all connections. |
| Ingen vekselstrømutgang. | Overload; Short circuit on AC output; Over temperature; Inverter in Powersave mode. | Reduce AC load; Check AC wiring for shorts; Ensure adequate ventilation; Connect a small AC load to wake up inverter from Powersave. |
| Overload shutdown. | Connected load exceeds inverter's continuous or surge rating. | Reduce the total AC load. Disconnect some appliances and restart the inverter. |
| Over temperature shutdown. | Insufficient ventilation; High ambient temperature; Blocked cooling vents. | Improve ventilation around the inverter; Ensure cooling vents are clear; Allow inverter to cool down before restarting. |
| Reverse polarity protection activated. | DC input cables connected incorrectly (+ to -). | Immediately disconnect DC power. Correct the positive and negative connections. |
| AC backfeed protection activated. | AC power from an external source (e.g., utility, generator) is connected to the inverter's output. | Ensure no external AC source is connected to the inverter's output. The inverter is designed to produce AC, not accept it. |
If the problem persists after attempting these solutions, contact Xantrex customer support or a qualified service technician.
8. Spesifikasjoner
| Attributt | Verdi |
|---|---|
| Modellnummer | 806-1800 |
| Kontinuerlig kraft | 1800 watt |
| Peak Surge Power | 2900 watt |
| DC-inngang voltage | 12 volt |
| AC Output Voltage | 120 volt vekselstrøm |
| AC-utgangsfrekvens | 60 Hz |
| Utgangsbølgeform | Ekte sinusbølge |
| Effektivitet (full belastning) | 85 % |
| Varevekt | 12 pund |
| Produktdimensjoner (L x B x H) | 19.5 x 16 x 14 tommer |
| Produsent | Xantrex Technologies |
9. Garanti og støtte
9.1 Garantiinformasjon
The Xantrex PROsine 1800 Power Inverter comes with a To års garanti fra kjøpsdatoen. Denne garantien dekker material- og produksjonsfeil ved normal bruk. Vennligst ta vare på kjøpsbeviset for garantikrav.
9.2 Kundestøtte
For technical assistance, troubleshooting, or warranty service, please contact Xantrex customer support. Visit the official Xantrex webnettstedet for den nyeste kontaktinformasjonen og støtteressursene.
Xantrex Official Webnettsted: www.xantrex.com