Logitech 980174-0403

Logitech USB Vantage Headset Instruction Manual

Modell: 980174-0403

For PlayStation 2 and PlayStation 3

Introduksjon

The Logitech USB Vantage Headset is designed to provide clear audio and voice communication for gaming on PlayStation 2 and PlayStation 3 consoles. It features a digital USB audio processor, a noise-canceling microphone, and an adjustable headband for comfort during extended use. The headset is compatible with games that support Logitech USB headsets.

Pakkeinnhold

  • Logitech USB Vantage Headset (with integrated 10-foot cord)
  • Three sets of interchangeable earpads (velvet, leatherette, and foam)

Oppsett

Koble til hodesettet

Logitech USB Vantage Headset with USB connector and adjustable microphone boom

Image description: A Logitech USB Vantage Headset shown from the side, highlighting the adjustable headband, earcups, and the flexible microphone boom. The USB connector is visible at the end of the cable.

  1. Locate an available USB port on your PlayStation 2 or PlayStation 3 console.
  2. Insert the USB connector of the Logitech USB Vantage Headset firmly into the USB port.
  3. Ensure the headset is securely connected. The console should recognize the new audio device automatically.

Spillkompatibilitet

  • The Logitech USB Vantage Headset requires games that specifically support Logitech USB headsets for full functionality, including voice chat and command recognition. Refer to your game's instruction manual or in-game settings for compatibility information.

Bruksanvisning

Justering av pannebåndet

  • Gently slide the earcups up or down along the headband until they rest comfortably over your ears. The headband is designed to provide a secure yet comfortable fit for various head sizes.

Using the Noise-Canceling Microphone

  • Position the flexible microphone boom approximately one inch (2.5 cm) from your mouth. The integrated noise-canceling feature helps to reduce ambient background noise, ensuring clearer voice transmission during gameplay.

Changing Earpads

  • To change earpads, gently peel off the current earpad from the earcup.
  • Select your preferred earpad material (velvet for breathability, leatherette for sound isolation, or foam for a soft feel).
  • Align the new earpad with the earcup and carefully stretch its elastic rim around the earcup's edge until it is securely attached.

Volumkontroll

  • Adjust the audio output level using the in-line volume control located on the headset cord. Additionally, you may need to adjust the master volume settings within your PlayStation console's system menu or the specific game's audio options.

Vedlikehold

Rengjøring

  • Wipe the headset surfaces, including the earcups and headband, with a soft, slightly damp klut.
  • Do not use harsh chemical cleaners, abrasive materials, or solvents, as these can damage the headset's finish and components.
  • For earpads, if removable, follow any specific cleaning instructions provided with the material. Ensure they are completely dry before reattaching.

Lagring

  • Store the headset in a clean, dry environment away from direct sunlight, extreme temperatures, and excessive humidity.
  • Avoid tightly wrapping the 10-foot cord around the headset to prevent kinks or damage to the internal wiring.

Feilsøking

Ingen lyd fra hodesettet

  • Sjekk USB-tilkobling: Ensure the USB connector is fully inserted into an active USB port on your PlayStation console. Try a different USB port if available.
  • Verify Console Audio Settings: Navigate to your PlayStation console's audio settings and confirm that the USB headset is selected as the primary audio output device.
  • Adjust Headset Volume: Check the in-line volume control on the headset cord and ensure it is not set to minimum or muted.
  • Spillkompatibilitet: Confirm that the game you are playing supports USB headsets for audio output.

Mikrofonen virker ikke

  • Check Microphone Position: Sørg for at mikrofonbommen er riktig plassert nær munnen din.
  • Verify Console/Game Settings: Go to your PlayStation console's microphone settings or the in-game audio/voice chat settings. Confirm that the USB headset microphone is enabled and set as the input device.
  • Spillkompatibilitet: Ensure the game supports voice chat or command recognition with a USB headset. Some older games may not have this functionality.
  • Testmikrofon: If your console has a microphone test feature, use it to verify microphone functionality.

Spesifikasjoner

TrekkVerdi
MerkenavnLogitech
Modellnummer980174-0403
Varevekt0.75 pund (ca. 340 gram)
StøykontrollAktiv støydemping (mikrofon)
Type lyddriverDynamisk driver
InnkapslingsmaterialeVelvet (interchangeable earpads include velvet, leatherette, foam)
Spesifikke bruksområder for produktetGaming
Kompatible enheterPlayStation 2, PlayStation 3
Kabelfunksjoner10-foot (approx. 3-meter) integrated cord
Ekstra funksjonerMikrofon inkludert, støydemping
HodetelefonuttakUSB (digital audio)
TilkoblingsteknologiKablet
Øreplassering for hodetelefonerOver Ear
Kontroll TypeVolume Control (in-line)

Garanti og støtte

Garantiinformasjon

  • For detailed warranty information regarding your Logitech USB Vantage Headset, please refer to the warranty card included with your product packaging. You can also find the most up-to-date warranty terms and conditions on the official Logitech webnettstedet.

Kundestøtte

  • Should you require further assistance, technical support, or have questions not covered in this manual, please visit the Logitech support webnettsted. Du finner vanligvis vanlige spørsmål, feilsøkingsguider og kontaktinformasjon for kundeservice der.

© 2023 Logitech. Alle rettigheter forbeholdt. Logitech, Logitech-logoen og andre Logitech-merker eies av Logitech og kan være registrert. Alle andre varemerker tilhører sine respektive eiere.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.