Introduksjon
The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.
Sikkerhetsinformasjon
ADVARSEL: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.
- Sørg for at strømmen er koblet fra før installasjon.
- Følg alle lokale og nasjonale elektriske forskrifter.
- Denne enheten er kun til innendørs bruk.
Pakkeinnhold
Kontroller at alle komponenter er til stede før installasjonen starter:
- Intermatic SS7C Digital Wall Switch Timer Unit
- Monteringsskruer
- Wire Mutters
- Bruksanvisning (dette dokumentet)
Oppsett og installasjon
Nødvendig verktøy: Screwdriver, Wire Strippers, Electrical Tape.
- Slå av strømmen: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage tester.
- Fjern eksisterende bryter: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
- Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
Bilde: Foran view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.
- Linjetråd: Connect to the timer's LINE terminal.
- Lastetråd: Connect to the timer's LOAD terminal.
- Jordingskabel: Connect to the timer's GROUND terminal.
- Nøytral ledning (hvis aktuelt): Some installations may require a neutral wire. Consult your local electrical codes.
- Monter timeren: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
- Gjenopprett kraften: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.
Betjening og programmering
The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.
1. Stille inn gjeldende tid og dag
- Trykk på KLOKKE knappen. Tidsdisplayet vil blinke.
- Bruk TIME og MINUTT knappene for å justere gjeldende tid.
- Trykk på DAG for å angi gjeldende ukedag.
- Pressen KLOKKE again to save and exit, or wait a few seconds for it to save automatically.
2. Programming ON/OFF Events
The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.
- Trykk på PROG button. The display will show "1 ON".
- Bruk TIME, MINUTT, og DAG buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
- Pressen PROG igjen. Displayet vil vise «1 AV».
- Set the desired OFF time and day(s) for Program 1 using the TIME, MINUTT, og DAG knapper.
- Gjenta trinn 1–4 for flere programmer (2 PÅ/AV til 6 PÅ/AV).
- After setting all desired programs, press KLOKKE for å gå tilbake til normal drift.
3. Manuell overstyring
To manually turn the connected device ON or OFF outside of programmed times, press the PÅ/AV button. This will temporarily override the current program until the next scheduled ON or OFF event.
4. Random Setting Feature
The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.
Vedlikehold
The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.
- Batteribytte: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
- Rengjøring: Clean the timer's surface with a soft, damp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Timeren slår seg ikke PÅ/AV til programmerte tidspunkter. | Incorrect programming; Manual override active; Power interruption. | Review programming steps. Ensure manual override is not active. Check power supply. |
| Skjermen er tom eller svak. | No power to the unit; Internal battery low. | Check circuit breaker. If power is present, the internal battery may need replacement. |
| Programming is lost after power outage. | Det interne batteriet er utladet eller defekt. | The internal battery needs replacement. Contact support if within warranty. |
| Connected device does not respond. | Incorrect wiring; Faulty device; Overload. | Verify wiring connections. Test the connected device independently. Ensure load does not exceed timer's rating. |
Spesifikasjoner
- Merke: Intermatic
- Modellnummer: SS7C
- Varevekt: 0.35 pund
- Antall innstillinger: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
- Skjermstørrelse: 1.5 tommer
- Farge: Hvit
- Produsent: INTERMATIC INC
- UPC: 078275056732
- ASIN: B0000BYDA2
Garanti og støtte
This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1 års begrenset produsentgaranti fra kjøpsdatoen. Denne garantien dekker defekter i materialer og utførelse ved normal bruk.
For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.
For the most up-to-date support information, please visit the official Intermatic webnettstedet eller se kontaktinformasjonen som følger med produktemballasjen.