Raymond Weil 4875-STC-00209 Automatic Chronograph Watch User Manual

1. Introduksjon

Thank you for choosing a Raymond Weil timepiece. This manual provides essential information for the proper setup, operation, and maintenance of your Raymond Weil 4875-STC-00209 automatic chronograph watch. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

2. Produktet er overview

The Raymond Weil 4875-STC-00209 is an elegant automatic chronograph watch featuring a stainless steel case, a black dial with Roman numerals, and a brown leather strap. It includes a chronograph function and a calendar display at the 12 o'clock position. The watch is equipped with a curved sapphire crystal for enhanced durability and a transparent caseback that showcases its intricate automatic movement.

Figur 1: Foran view of the Raymond Weil 4875-STC-00209 watch. This image displays the watch's black dial with Roman numeral hour markers, three chronograph sub-dials, and the date window at 12 o'clock. The watch is fitted with a brown leather strap.

Figur 2: Bak view of the Raymond Weil 4875-STC-00209 watch. This image highlights the transparent caseback, allowing visibility of the automatic mechanical movement. The brown leather strap with its buckle is also visible.

3. Oppsett

3.1. Innledende vikling

Your Raymond Weil 4875-STC-00209 is an automatic watch, meaning it is powered by the motion of your wrist. However, for initial setup or if the watch has stopped due to lack of wear, it requires manual winding:

1. Ensure the crown (located on the side of the watch) is in its normal, pushed-in position.
2. Vri kronen med klokken omtrent 20–30 ganger. Dette vil gi nok gangreserve til å starte klokken.
3. Once worn, the natural motion of your arm will keep the watch wound.

3.2. Stille inn tid

Slik stiller du inn tiden på klokken:

1. Pull the crown out to the outermost position (position 3). The seconds hand will stop.
2. Vri kronen med eller mot klokken for å flytte time- og minuttviserne til ønsket tid.
3. Push the crown back into its normal position (position 1) to restart the watch.

3.3. Angi datoen

Slik angir du datoen:

1. Trekk kronen ut til midtposisjon (posisjon 2).
2. Turn the crown clockwise to advance the date. Avoid setting the date between 9 PM and 3 AM, as this is when the date change mechanism is engaged and could cause damage.
3. Once the correct date is displayed, push the crown back into its normal position (position 1).

4. Betjening av kronografen

Your watch features a chronograph function for measuring elapsed time. It is operated by two pushers located on the side of the case, typically above and below the crown.

1. Start: Press the top pusher to start the chronograph. The central chronograph seconds hand will begin to move.
2. Stopp: Press the top pusher again to stop the chronograph. The elapsed time will be indicated by the central chronograph seconds hand and the chronograph sub-dials (typically for minutes and hours).
3. Tilbakestille: Etter at kronografen har stoppet, trykk på den nederste skyveknappen for å tilbakestille alle kronografviserne til nullposisjonene.

Note: Avoid operating the chronograph pushers underwater to prevent water ingress.

5. Vedlikehold

5.1. Vannmotstand

Your Raymond Weil 4875-STC-00209 watch has a water resistance rating of 30 meters (100 feet). This rating means the watch is suitable for everyday use and can withstand splashes or brief immersion in water. It is ikke egnet for svømming, dusjing eller dykking. Sørg alltid for at kronen er helt innskjøvet før kontakt med vann.

5.2. Rengjøring

For å bevare klokkens utseende:

• Tørk av dekselet og krystallen med en myk, tørr klut.
• For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals to prevent damage and discoloration.

5.3. Oppbevaring

When not wearing your watch for an extended period, store it in a cool, dry place, away from direct sunlight and strong magnetic fields, which can affect the accuracy of the automatic movement.

6. Feilsøking

Hvis du støter på problemer med klokken din, bør du vurdere følgende:

• Klokken går ikke: Ensure the watch is sufficiently wound. If it has been stationary, manually wind it as described in Section 3.1.
• Unøyaktig tid: Exposure to strong magnetic fields can affect accuracy. If you suspect this, consult an authorized service center.
• Datoen endres ikke: Check if the date is being set during the prohibited hours (9 PM - 3 AM). Adjust the time past 3 AM before setting the date.

For persistent issues, please contact an authorized Raymond Weil service center.

7. Spesifikasjoner

8. Garanti og støtte

Your Raymond Weil watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, registration, and to locate an authorized service center, please refer to the official Raymond Weil website or the warranty card included with your purchase. For any support inquiries, it is recommended to contact Raymond Weil customer service directly.