adj PC-100A

American DJ PC-100A 8-Channel AC Power Strip

Bruksanvisning

1. Introduksjon

The American DJ PC-100A is a robust 8-channel AC power center designed to streamline your equipment setup by eliminating the need for multiple extension cords and messy wiring. This unit is ideal for managing power to lighting and sound equipment in various professional and home studio environments. It features individual on/off toggle switches for each channel, a built-in resettable circuit breaker, and is designed for standard 19-inch rack mounting.

Front view of the American DJ PC-100A power strip, showing eight red toggle switches and the ADJ logo.

Figur 1: Foran view of the PC-100A, displaying the eight individual power switches and the ADJ branding. This view highlights the user interface for controlling connected devices.

2. Sikkerhetsinformasjon

ADVARSEL: For å redusere risikoen for elektrisk støt, må du ikke utsette dette apparatet for regn eller fuktighet. Ikke fjern dekselet. Det finnes ingen deler inni som kan repareres av brukeren. Kontakt kvalifisert servicepersonell for service.

  • Always ensure the unit is connected to a grounded power outlet.
  • Ikke overskrid den maksimale belastningen på 15 amps or 1800 watts for the entire unit. Overloading can trip the circuit breaker or cause damage.
  • Do not attempt to modify or repair the unit. Refer all servicing to qualified personnel.
  • Keep the unit away from water, excessive heat, and direct sunlight.
  • Dette produktet kan inneholde kjemikalier som er kjent for staten California for å forårsake kreft og fødselsskader eller andre reproduksjonsskader. Vask hendene etter håndtering.

3. Oppsett

  1. Utpakking: Carefully remove the PC-100A from its packaging. Inspect the unit for any signs of damage during shipping.
  2. Montering: The PC-100A is designed to be rack-mountable in a standard 19-inch equipment rack. Secure the unit using appropriate rack screws (not included) through the mounting holes on the front flanges. Ensure it is firmly seated.
  3. Koble til enheter: Locate the eight 120V, 3-prong plug sockets on the rear of the unit. Plug your lighting, sound, or other equipment into these sockets. Ensure all devices are properly seated.
  4. Strømtilkobling: Connect the integrated 6 ft. power cord from the PC-100A to a suitable grounded 120V AC power outlet.
Bak view of the American DJ PC-100A power strip, showing eight 3-prong AC outlets and the attached power cord.

Figur 2: Bak view of the PC-100A, illustrating the eight individual AC outlets where equipment can be connected, along with the integrated power cord.

4. Drift

The PC-100A provides individual control over each connected device.

  • Individual Power Control: Each of the eight channels on the front panel has a lighted toggle switch. To power on a device connected to a specific channel, flip its corresponding switch to the 'ON' position. The switch will illuminate when the channel is active. To power off, flip the switch to the 'OFF' position.
  • Strømbryter: The unit is equipped with a 15A resettable circuit breaker on the front panel. If the total current draw from all connected devices exceeds 15 amps, the breaker will trip to protect the unit and your equipment. If this occurs, the breaker button will pop out.

5. Vedlikehold

The American DJ PC-100A requires minimal maintenance to ensure long-term performance.

  • Rengjøring: Periodically wipe the exterior of the unit with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
  • Tilbakestilling av kretsbryter: If the circuit breaker trips (the button pops out), disconnect some of the connected equipment to reduce the load. Wait a few moments, then press the breaker button back in to reset the power. If the breaker continues to trip, reduce the load further or consult a qualified electrician.
  • Kabeladministrasjon: Ensure that all power cords connected to the rear outlets are neatly organized and not under strain to prevent damage to the cables or the unit.

6. Feilsøking

ProblemMulig årsakLøsning
No power to any channel.Unit not plugged in, wall outlet not active, or main circuit breaker tripped.Check power cord connection. Test wall outlet with another device. Check building's main circuit breaker.
One or more channels have no power.Individual channel switch is off, or unit's 15A circuit breaker tripped.Ensure the specific channel's toggle switch is in the 'ON' position. Check if the 15A resettable circuit breaker on the front panel has popped out. If so, reduce load and reset.
Circuit breaker frequently trips.Total connected load exceeds 15 amps (1800 watt).Reduce the number of devices connected to the PC-100A, or connect high-power devices to a separate power source.
Toggle switch feels loose or unresponsive.Wear and tear on the switch mechanism.This may indicate a need for professional servicing. Do not attempt to repair yourself.

7. Spesifikasjoner

TrekkSpesifikasjon
ModellPC-100A
Kanaler8 (with individual lighted toggle switches)
Inngang Voltage120V AC
Maksimal belastning15 Amps / 1800 watt
Strømbryter15A Tilbakestillbar
Stikkontakter8 x 3-prong (rear)
Lengde på strømledningen6 fot.
Dimensjoner (LxBxH)483 mm x 127 mm x 51 mm (19 x 5 x 2 tommer)
Vekt4 lbs. (2 kg.)
Montering19-inch Rack Mountable (1U space)

8. Garanti og støtte

For warranty information and details regarding your American DJ PC-100A, please refer to the warranty card included with your purchase or visit the official ADJ Products website. ADJ Products provides customer support and service for their products.

For technical assistance or service inquiries, please contact ADJ Products directly through their official website or customer service channels. Always provide your product model number (PC-100A) and serial number when seeking support.

© 2025 American DJ. All rights reserved. Specifications are subject to change without notice.