Grundfos 59896155

Grundfos UP15-42F SuperBrute Recirculating Pump Instruction Manual

Model: 59896155 | Brand: Grundfos

1. Introduksjon

The Grundfos UP15-42F SuperBrute Recirculating Pump is engineered for efficient circulation in heating systems, hot domestic water systems, and cooling/air-conditioning systems. This pump features a wet rotor design, ensuring quiet operation and minimal maintenance. Its robust construction and energy-efficient motor make it a reliable choice for continuous water circulation needs.

2. Sikkerhetsinformasjon

Please read and understand all safety instructions before installing or operating the pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Elektrisk sikkerhet: Ensure the power supply is disconnected before any installation or maintenance. The pump operates on 115 Volts. All electrical wiring must be performed by a qualified electrician and comply with local codes.
  • Temperaturgrenser: Do not exceed the maximum fluid temperature of 230°F (110°C) or operate below the minimum fluid temperature of 36°F (2°C).
  • Trykkgrenser: The maximum working pressure for this pump is 145 PSI. Ensure your system's pressure does not exceed this limit.
  • Installasjon: Installation should be performed by qualified personnel familiar with plumbing and electrical systems.
  • Varme overflater: The pump housing may become hot during operation. Avoid direct contact.

3. Produktet er overview

Grundfos UP15-42F SuperBrute Recirculating Pump, front view.

This image displays the Grundfos UP15-42F recirculating pump. It features a robust cast iron housing, a red motor casing, and connection points for plumbing. The pump is designed for efficient water circulation in various systems.

The Grundfos UP15-42F is a 1/25 HP SuperBrute recirculating pump designed for durability and performance. Key features include:

  • Robust konstruksjon: Features a cast iron housing, aluminum stator housing, stainless steel spherical separator, stainless steel/tungsten carbide rotor, and a composite impeller.
  • Wet Rotor Design: Ensures quiet operation and eliminates the need for a shaft seal, reducing maintenance.
  • Korrosjonsforebygging: Designed to eliminate and prevent the corrosive effects of fresh water.
  • Energieffektiv: Low energy consumption with a power consumption of 25 watts.
  • Enkel installasjon: Designet for enkel oppsett.
  • Forbedret ytelse: Offers enhanced efficiency for various circulation applications.

4. Spesifikasjoner

SpesifikasjonVerdi
ProdusentGrundfos
Delenummer59896155
Vare modellnummer59896155
Varevekt6.92 pund
Produktdimensjoner5.25 x 4.19 x 6.5 tommer
StørrelseLiten
FargeRød
Stilsirkulasjonspumpe
MaterialeStøpejern
StrømkildeElektrisk drevet
Voltage115 volt
Wattage25 watts (Max. power input: 85 W)
Antall varepakke1
Strømningshastighet0 - 15.5 US GPM
Hodeområde1 - 15 feet (12'' - 180'')
Vannforbruk155 Gallons (per hour at max flow)
Maksimal væsketemperatur230 °F (110 °C)
Minimum Fluid Temperature36 °F (2 °C)
Maksimalt arbeidstrykk145 PSI
ForbindelseFlange - (2) 3/4'' diameter bolt holes
SertifiseringUL

5. Installasjon og oppsett

Proper installation is crucial for the pump's performance and longevity. Refer to the detailed instructions provided with your pump packaging for specific diagrams and steps.

  1. Monteringssted: Select a suitable location that allows for easy access for maintenance and ensures the motor shaft is horizontal. This orientation is critical for the wet rotor design.
  2. Rørtilkoblinger: The pump requires a flange connection with two 3/4-inch diameter bolt holes. Flanges are not included and must be purchased separately. Ensure all connections are watertight using the two gaskets provided with the pump.
  3. Elektrisk tilkobling: Connect the pump to a dedicated 115-volt, single-phase power supply. Ensure all wiring conforms to local electrical codes. The pump's terminal box cover is designed for secure wiring.
  4. Systemfylling: After installation, fill the system with water and bleed any air from the pump and piping to prevent dry running.
  5. Tilbakeslagsventil: The pump includes a POM check valve. Ensure it is correctly oriented if removed during installation.

6. Bruksanvisning

Once installed and properly connected, the Grundfos UP15-42F pump is designed for continuous operation within its specified parameters.

  • Strøm på: Restore power to the pump. The pump will begin circulating water.
  • Temperaturovervåking: Ensure the fluid temperature remains within the operational range of 36°F (2°C) to 230°F (110°C).
  • Trykkovervåking: Verify that the system pressure does not exceed 145 PSI.
  • Valgfrie kontroller: For optimized energy savings, consider integrating an optional timer or aquastat. These devices can pre-program usage times or operate the pump by sensing water temperature, reducing unnecessary continuous operation.
  • Stille drift: The wet rotor design ensures the pump operates quietly. Any unusual noises should be investigated.

7. Vedlikehold

The Grundfos UP15-42F pump is designed to be maintenance-free due to its wet rotor design and durable materials. No routine lubrication or shaft seal replacement is required.

  • Periodisk inspeksjon: Periodically inspect the pump and connections for any signs of leaks, corrosion, or unusual wear.
  • Renslighet: Keep the area around the pump clean and free from debris to ensure proper ventilation.
  • Uvanlige lyder: If the pump develops unusual noises or vibrations, consult the troubleshooting section or contact Grundfos support.

8. Feilsøking

This section provides guidance for common issues. For complex problems, contact a qualified technician or Grundfos support.

  • Pump Does Not Start:
    • Sjekk om strømforsyningen er tilkoblet og aktiv.
    • Kontroller at sikringen eller strømbryteren ikke har løst ut.
    • Sørg for at alle elektriske tilkoblinger er sikre.
  • Ingen vannføring eller redusert vannføring:
    • Check for closed valves in the piping system.
    • Inspect for air in the system; bleed air if necessary.
    • Ensure the pump is not running dry.
    • Check for blockages in the impeller or piping.
  • Uvanlig støy eller vibrasjon:
    • Air in the system can cause noise; bleed air.
    • Check for loose mounting bolts or connections.
    • Ensure the motor shaft is horizontal.
    • If noise persists, the impeller or motor may require inspection by a professional.
  • Lekkasjer:
    • Check all pipe connections and ensure gaskets are properly seated and tightened.
    • Inspect the pump housing for cracks or damage.

9. Garanti og støtte

For warranty information, technical support, or service inquiries, please contact Grundfos directly. Keep your purchase receipt and product model number (59896155) readily available when contacting support.

You can typically find contact information on the official Grundfos webnettstedet eller i den originale produktemballasjen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.