Introduksjon
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Bilde: Foran view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Nøkkelfunksjoner
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Bredt temperaturområde: 32 til 572 °F (0 til 300 °C).
- Programmable Alarms: Set desired temperatures for food and oven; an alarm sounds when reached.
- Timer funksjon: Includes a 10-hour count up/down timer.
- Slitesterk konstruksjon: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Allsidig montering: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Enhetsvalg: Bytt enkelt mellom Fahrenheit og Celsius.
- Makt: Operates on 1 AAA battery (included).
Oppsett
- Batteriinstallasjon:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Probetilkobling:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- Plassering:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Bilde: Bak view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Bruksanvisning
Temperaturmåling
- Sett inn sonde: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Strøm på: Trykk på PÅ/AV button to activate the thermometer.
- Velg enhet: Trykk på °F/°C button to toggle between Fahrenheit and Celsius display.
- Set Food Temperature Alarm:
- Trykk på MODUS button until "FOOD" is selected.
- Trykk på KJØTT button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press SETT to manually adjust the target temperature using the HR og MIN knapper.
- Pressen ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Trykk på MODUS button until "OVEN" is selected.
- Pressen SETT to manually adjust the target oven temperature using the HR og MIN knapper.
- Pressen ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Timer funksjon
- Velg timermodus: Trykk på MODUS button until "TIMER" is selected.
- Still inn tid: Bruk HR og MIN buttons to set the desired countdown time (up to 10 hours).
- Start/stopp: Trykk på START/STOPP button to begin or pause the countdown.
- Tilbakestille: To clear the timer, press and hold the START/STOPP knapp.
Vedlikehold
- Rengjøring av sonden: After each use, wipe the stainless steel probe with a damp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Rengjøring av enheten: Wipe the thermometer unit with a soft, damp klut. Ikke bruk slipende rengjøringsmidler eller senk enheten i vann.
- Lagring: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Batteribytte: Replace the AAA battery when the display becomes dim or unresponsive.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Ingen skjerm eller svak skjerm | Lavt eller utladet batteri; feil batteriinstallasjon. | Replace the AAA battery, ensuring correct polarity. |
| Unøyaktige temperaturavlesninger | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Alarmen går ikke | Alarm function not activated; volume too low. | Trykk på ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Spesifikasjoner
- Modell: DSP1
- Temperaturområde: 32 til 572 °F (0 til 300 °C)
- Probelengde: 6.75 tommer (17 cm)
- Kabellengde: 39 tommer (1 m)
- Strømkilde: 1 x AAA-batteri (inkludert)
- Visningstype: Digital LCD
- Materialer: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- Funksjoner: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Dimensjoner (enhet): Omtrent 7.5 cm (H) x 3 cm (B) x 0.625 cm (D)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Garantiinformasjon
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for eventuelle garantikrav.
Støtte
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN webnettstedet.
Produsent: CDN
Webnettsted: www.cdn-timeandtemp.com
Telefon: 800-338-5594
