Introduksjon
Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.
Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.
Oppsett og installasjon
The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.
Pakkeinnhold:
- CL1005 Lock Body
- Monteringsbolter
- Installasjonsmal
- 2 x AAA batterier
- Cam (pre-installed or separate)
Installasjonstrinn:
- Klargjør døren: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
- Insert Lock Body: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
- Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
- Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
- Installer batterier: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
- Testoperasjon: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).
Bruksanvisning
The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.
Opening the Lock:
- Skriv inn brukerkoden din på 4–6 sifre.
- The lock will emit a confirmation tone and the LED will flash green.
- Turn the knob to the unlocked position.
- Åpne skapdøren.
Lukking og låsing:
- Lukk skapdøren.
- Turn the knob to the locked position. The lock will automatically engage.
Changing the User Code:
Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.
Battery Failure Override:
In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.
Vedlikehold
Batteribytte:
When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.
- Open the battery compartment cover on the back of the lock.
- Ta ut de gamle batteriene.
- Insert new 2 x AAA batteries, ensuring correct polarity.
- Lukk batteridekselet godt.
Rengjøring:
Rengjør låsens utside med en myk klutamp klut. Unngå bruk av slipende rengjøringsmidler, løsemidler eller sterke kjemikalier, da disse kan skade overflaten og de elektroniske komponentene.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lock does not respond to code entry. |
|
|
| Lock opens but does not stay locked. |
|
|
| Lock emits warning beeps/flashes. | Lav batteristrøm. | Replace the 2 x AAA batteries immediately. |
Spesifikasjoner
- Modell: CL1005
- Merke: Codelocks
- Låstype: Keypad, Keyless
- Spesialfunksjon: Nøkkelfri adgang
- Makt: 2 x AAA-batterier (følger med)
- Batterilevetid: Approximately 15,000 openings
- Dørtykkelse: Opptil 1/2 tomme (12.7 mm)
- Tønnestørrelse: 5/8 inch (15.8 mm) threaded
- Dimensjoner (L x B x H): 6 x 2.5 x 1.5 tommer (152 x 63.5 x 38.1 mm)
- Vekt: 16 unser (0.45 kg)
- Fullfør: Silver Grey (Painted)
- Kontrollmetode: Røre
- Stil: Moderne
Garanti og støtte
For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webnettstedet eller kontakt kundeserviceavdelingen deres. Ta vare på kjøpskvitteringen som kjøpsbevis.
Codelocks Official Webnettsted: www.kodelåser.com