1. Introduksjon
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Figur 1.1: Foran view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Sikkerhetsinformasjon
ADVARSEL: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Sørg for at alle koblinger er sikre og ordentlig isolert.
- Ikke modifiser produktet på noen måte.
3. Komponentliste
Kontroller at alle komponenter er til stede før installasjonen starter:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Oppsett og installasjon
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Slå av strømmen: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Forbered bolig: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Fest stikkontakt: Lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Installer pære: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Gjenopprett kraften: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Figur 4.1: Ovenfra og ned view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Bruksanvisning
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Sørg for riktig wattage bulb (up to 250W) is installed.
- Bruk veggbryteren til å slå lysarmaturen av eller på.
6. Vedlikehold
The P8072-28 Recessed Trim requires minimal maintenance.
- Rengjøring: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp klut. Ikke bruk slipende rengjøringsmidler eller løsemidler, da de kan skade overflaten.
- Bytte av pære: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lyset tennes ikke. | Ingen strøm til armaturet. Pæren er løs eller utbrent. Feil ledninger. | Sjekk effektbryter/sikring. Stram til eller bytt pære. Kontakt en kvalifisert elektriker for å sjekke ledningene. |
| Trim does not sit flush with ceiling. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| Lette flimmer. | Løs pære. Inkompatibel dimmerbryter. Ledningsproblem. | Stram pæren. Ensure dimmer is compatible with incandescent lights. Rådfør deg med en kvalifisert elektriker. |
8. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnummer | P8072-28 |
| Merke | Fremdriftsbelysning |
| Type | Recessed Trim (Open Splay) |
| Farge | Hvit |
| Materiale | Aluminium |
| Utvendig diameter | 7-3/4 tommer (19.69 cm) |
| Produktdimensjoner (L x B x H) | 19.69 cm x 19.69 cm x 12.07 cm (7.75 x 7.75 x 4.75 tommer) |
| Varevekt | 5.9 unser (167 gram) |
| Voltage | 120 volt |
| Max Wattage | 250 watt (glødepærer) |
| Strømkilde | Elektrisk med ledning |
| Innendørs/utendørs bruk | Innendørs |
| Kompatible hus | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Garantiinformasjon
This Progress Lighting P8072-28 Recessed Trim comes with a 1 års begrenset garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Støtte og kontakt
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting webnettstedet for den mest oppdaterte kontaktinformasjonen.
Progress Lighting Official Webnettsted: Visit the Progress Lighting Store on Amazon