Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Produkt overview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Figur 1: Foran view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Sikkerhetsinformasjon

ADVARSEL: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Ikke installer denne lampen i våte eller dråper.amp steder.
• Sørg for at armaturen er forsvarlig montert til et strukturelt element i taket.
• Bruk kun spesifisert pæretype og hvatage for å forhindre overoppheting og skade.
• Hold brennbare materialer unna lysarmaturen.

Pakkeinnhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Spesifikasjoner

Oppsett og installasjon

Viktig: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Klargjør installasjonsområdet:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Sørg for at monteringsflaten er ren, tørr og strukturelt forsvarlig.
2. Monter armaturet:
   • Carefully remove the fixture from its packaging.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Elektriske tilkoblinger:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Stikk forsiktig alle ledninger inn i uttaksboksen.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Gjenopprett kraften:
   • Slå på strømmen igjen ved sikringsskapet eller strømbryteren.
   • Test the fixture to ensure it operates correctly.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Bruksanvisning

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Slå på/av:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Vedlikehold

Regelmessig vedlikehold sikrer optimal ytelse og levetid for lysarmaturen din.

• Rengjøring:
  • Før rengjøring, sørg for at strømmen til armaturet er slått av med sikringen.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp klut.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • La armaturen tørke helt før du gjenoppretter strømmen.
• Bytte av pære:
  • Slå av strømmen til armaturen ved sikringsbryteren.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp holdere.
  • Replace the acrylic diffuser.
  • Gjenopprett strømmen og test armaturen.

Feilsøking

Hvis du opplever problemer med lysarmaturen din, kan du se følgende vanlige problemer og løsninger:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Garanti og støtte

Garanti: The Progress Lighting P7206-30EB fixture comes with a 1 års begrenset garanti fra kjøpsdatoen. Denne garantien dekker material- og produksjonsfeil ved normal bruk. Den dekker ikke skader som følge av feil installasjon, ulykke, misbruk, misbruk eller uautoriserte reparasjoner.

Kundestøtte: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting webnettstedet for den mest oppdaterte kontaktinformasjonen.

Vennligst ta vare på kjøpskvitteringen som kjøpsbevis av garantihensyn.