Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture Instruction Manual

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The P3689-44 fixture features a clean design with elegant lines, complemented by a satin Oxford Silver finish and an etched alabaster style glass shade. Its unique twist-lock shade design allows for easy access for changing light bulbs without external hardware.

Sikkerhetsinformasjon

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringsskapet eller sikringsbryteren før installasjon eller service.

FORSIKTIGHET: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter, forordninger eller National Electric Code (NEC).
• Kontakt en kvalifisert elektriker hvis du er usikker på kablingsprosedyrene.
• Bruk kun UL/cUL-listede ledningskontakter.
• Ikke overskrid maksimumsverdientage spesifisert for pærene.
• Sørg for at armaturen er forsvarlig montert til et strukturelt element i taket.

Pakkeinnhold

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding.

• Armaturhus (1)
• Glassskjerm (1)
• Monteringssett (1)
• Bruksanvisning (1)

Oppsett og installasjon

Nødvendig verktøy (ikke inkludert):

• Phillips skrutrekker
• Flat skrutrekker
• Wire strippere
• Elektrisk tape
• Vernebriller

Installasjonstrinn:

1. Slå av strømmen: Before starting installation, ensure the power to the circuit is turned off at the main fuse box or circuit breaker.
2. Prepare mounting: Attach the mounting bracket to the junction box in the ceiling using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Kabling: Connect the fixture's wires to the house wires according to the following:
   • Koble til svart armaturledning til svart (varm) husledning.
   • Koble til hvit armaturledning til hvit (nøytral) husledning.
   • Koble til bart kobber (jord)armaturledning til grønn eller bart kobber (jord) husledning.
   Secure all connections with wire connectors and wrap with electrical tape for added safety.
4. Mount fixture body: Carefully push the wired fixture body up to the ceiling, aligning the screw holes on the fixture with the screws on the mounting bracket. Secure the fixture body in place with the decorative nuts or screws provided.
5. Installer pærer: Insert two (2) 60-watt maximum medium base bulbs (not included) into the sockets. Do not exceed the recommended wattage.
6. Attach glass shade: Align the glass shade with the fixture body and twist it clockwise until it locks securely into place. The unique twist-lock design ensures the shade is held firmly without visible hardware.

Image: The Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture, showcasing its Oxford Silver finish and etched alabaster style glass shade. The fixture is designed for flush mounting to the ceiling.

Bruksanvisning

Once the fixture is fully installed and bulbs are in place, restore power at the main fuse box or circuit breaker. The fixture is operated via a standard wall switch (not included) connected to the circuit.

• Sørg for riktig wattage bulbs (max 60-watt medium base) are used to prevent overheating or damage.
• The fixture is designed for indoor use in dry locations only.

Vedlikehold

Rengjøring:

To clean the fixture, ensure power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used sparingly on a cloth, then wiped dry.

Bytte av pære:

To replace bulbs, turn off power at the circuit breaker. Gently twist the glass shade counter-clockwise to remove it. Unscrew the old bulbs and replace them with new 60-watt maximum medium base bulbs. Reattach the glass shade by twisting it clockwise until secure.

Feilsøking

Spesifikasjoner

Garanti og støtte

This Progress Lighting fixture is covered by a 1 års produsentgaranti fra kjøpsdatoen. Denne garantien dekker defekter i materialer og utførelse ved normal bruk.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase.

Progress Lighting Customer Service: Refer to the official Progress Lighting webnettstedet eller produktemballasjen for oppdatert kontaktinformasjon.