Testo 810 Pocket Pro IR/Ambient Thermometer

1. Introduksjon

The Testo 810 is a compact, handy instrument designed for simultaneous non-contact measurement of surface temperature using infrared technology and ambient air temperature. This device is ideal for quick checks and comparisons, such as assessing the temperature difference between a radiator surface and the surrounding room air. Its intuitive operation and robust design make it suitable for various professional applications.

2. Sikkerhetsinformasjon

Please read this manual carefully before operating the Testo 810 thermometer. Adhere to all safety instructions to ensure safe and reliable operation.

• Do not point the laser beam directly at eyes or allow it to reflect off shiny surfaces into eyes.
• Ikke bruk instrumentet i nærheten av eksplosive gasser, damper eller støv.
• Protect the instrument from extreme temperatures, direct sunlight, and mechanical shock.
• Only use the instrument for its intended purpose as described in this manual.
• Keep the instrument out of reach of children.

3. Produktfunksjoner

• Handy pocket-sized combination instrument for non-contact measurement of surface temperature and air temperature.
• Features a 1-point laser for precise measurement point marking and 6:1 optics ratio.
• Includes Hold-function to freeze current readings on the display.
• Displays maximum (Max) and minimum (Min) values recorded during a measurement session.
• Calculates and displays the difference between air and surface temperatures.
• Adjustable emissivity setting for accurate infrared measurements on various surfaces.
• Equipped with display illumination for use in dimly lit environments.
• Comes with a protective cap for safe storage, a wrist strap, and a belt holder for portability.

4. Komponenter og skjerm

This image displays the Testo 810 thermometer from the front. The large digital display shows both infrared (IR) surface temperature and ambient air temperature. Below the display are three control buttons: an up arrow button, a 'Mode' button, and a power button. The infrared sensor and ambient air sensor are located at the top of the device.

This image shows the Testo 810 thermometer being held in a user's hand, emphasizing its compact and ergonomic design. This perspective highlights its portability and ease of use for single-handed operation.

4.1. Kontrollknapper

• På-knapp (⏻): Slår instrumentet av eller på.
• Pil opp-knapp (▲): Used for navigating menus or increasing values (e.g., emissivity).
• Modusknapp: Cycles through display modes (e.g., Hold, Min/Max, ∆T).

4.2. Visningselementer

• IR Temperature: Main large digits, showing non-contact surface temperature.
• Lufttemperatur: Smaller digits, showing ambient air temperature.
• ∆T (Delta T): Displays the difference between IR and air temperature.
• Hold-indikator: Appears when the Hold function is active.
• Min/Max Indicator: Appears when displaying minimum or maximum values.
• Emissivity Setting (ε): Indicates the current emissivity value.
• Batteriindikator: Viser gjenværende batterilevetid.

5. Oppsett

5.1. Installasjon av batteri

The Testo 810 requires 2 AAA batteries (included).

1. Locate the battery compartment cover on the rear of the instrument.
2. Skyv eller løsne dekselet for å åpne rommet.
3. Sett inn de to AAA-batteriene, og sørg for at polariteten (+/-) er riktig veiledet som angitt inni batterirommet.
4. Lukk batteridekselet godt.

6. Drift

6.1. Slå på/av

• For å slå på: Trykk på ⏻ button. The display will illuminate and show current readings.
• For å slå av: Trykk og hold inne ⏻ button until the display turns off. The instrument also features an auto-off function to conserve battery life.

6.2. Taking Measurements (IR and Ambient)

The Testo 810 simultaneously measures both surface and air temperatures.

1. Sørg for at instrumentet er slått på.
2. Point the infrared sensor (at the top of the device) towards the surface you wish to measure. The 1-point laser will indicate the center of the measurement spot.
3. The IR temperature will be displayed in the larger digits, while the ambient air temperature will be shown in smaller digits.
4. For accurate IR readings, ensure the distance to the object is appropriate for the 6:1 optics ratio (e.g., at 6 inches distance, the measurement spot is 1 inch in diameter).

6.3. Adjusting Emissivity (ε)

Emissivity is crucial for accurate infrared temperature measurement. Different materials have different emissivity values. The Testo 810 allows adjustment from 0.10 to 1.00.

1. With the instrument on, press the Modus button repeatedly until the emissivity symbol (ε) appears on the display.
2. Bruk ▲ button to adjust the emissivity value. Refer to standard emissivity tables for common materials.
3. Trykk på Modus button again to confirm the setting and return to measurement mode.

6.4. Hold and Min/Max Functions

• Hold funksjon: During measurement, briefly press the Modus button. The current readings will be frozen on the display, indicated by a 'Hold' symbol. Press Modus again to resume live measurement.
• Min/Max Values: Mens du er i målemodus, trykk på Modus button repeatedly to cycle through the minimum (Min) and maximum (Max) recorded temperatures for both IR and air. The display will show 'Min' or 'Max' accordingly.
• Delta T (∆T): Fortsett å trykke på Modus knappen til view the temperature difference between the IR surface and ambient air.

7. Vedlikehold

7.1. Rengjøring

To ensure accurate readings and prolong the life of your instrument:

• Wipe the instrument casing med annonseamp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid touching the lens directly with fingers.

7.2. Batteribytte

When the battery indicator shows low power, replace the batteries as described in Section 5.1. Always use fresh AAA alkaline batteries.

7.3. Oppbevaring

When not in use, store the Testo 810 in its protective cap in a dry, dust-free environment within the specified operating temperature range.

8. Feilsøking

If you encounter issues with your Testo 810, refer to the table below:

9. Spesifikasjoner

10. Garanti og støtte

For information regarding warranty coverage, technical support, or service, please contact Testo customer service directly. Keep your purchase receipt as proof of purchase.

Testo Customer Support:

• Visit the official Testo webnettsted for kontaktinformasjon og støtteressurser: www.testo.com