Atlas Sound M1000 lydmaskerende høyttaler bruksanvisning

Introduksjon

The Atlas Sound M1000 is an 8-inch dual cone sound masking speaker assembly designed for installation in plenum spaces. This unit is engineered to accurately reproduce sound masking signals, contributing to acoustic privacy and comfort in various environments. It features an integrated 70.7V transformer with an external tap selector for precise system tuning and includes innovative installation hardware for simplified setup.

Sikkerhetsinformasjon

Always adhere to local electrical codes and safety regulations during installation. Ensure power is disconnected before making any electrical connections. This product is UL 1480 and UL 2043 listed for use in air handling spaces, indicating compliance with safety standards for such environments. Installation should be performed by qualified personnel.

Pakkeinnhold

The M1000 unit comes pre-assembled and includes the following components:

• 8-inch diameter dual cone loudspeaker
• Integrated 70.7V transformer
• Innkapsling
• Baffle
• Mounting hardware (including EZ hang brackets and snap hanger assembly)

The pre-assembled unit includes the 8" dia. loudspeaker, transformer, enclosure, baffle, and mounting hardware. The EZ hang brackets and snap hanger assembly are integrated for ease of installation.

Oppsett og installasjon

The M1000 speaker is designed for quick and easy installation in plenum spaces, utilizing its integrated EZ hang brackets.

Montering

1. Forbered monteringssted: Identify the desired location in the plenum space. The unit is suitable for use above suspended ceiling systems or in open ceiling spaces.
2. Utilize EZ Hang Brackets: The factory-installed EZ hang brackets are collapsible and can be configured for upward, downward, or side-firing installation. Extend these brackets as needed.
3. Sikre enheten: Use the snap hanger assembly to securely mount the speaker. An optional MCHAIN72 suspension chain system (sold separately) can also be used for quick mounting and height adjustment.

Wiring and Tap Selection

The M1000 features an innovative input panel for electrical connections.

1. Access Input Panel: The input panel includes knockouts and a strain relief connector. Remove the plate to access wiring terminals.
2. Koble til ledninger: Connect the 70.7V audio signal wiring to the terminals. The system accommodates rigid or flexible conduit if required. An integral wire strain relief ensures secure cable termination.
3. Select Power Tap: Use the external tap selector switch to choose the desired power setting (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for the 70.7V system. This allows for precise system tuning to achieve the required sound masking level. Ensure the "OFF" position is selected before making connections.

Figur 1: Atlas Sound M1000 speaker with visible tap selector switch and wiring input. The switch allows selection of power taps from 0.25W to 4.0W for 70.7V systems, or the 'OFF' position.

Bruksanvisning

The Atlas Sound M1000 is a passive sound masking speaker. Once properly installed and connected to a 70.7V sound masking system, its operation is integrated with the overall system control. The primary operational adjustment is the power tap selection.

• Power Tap Adjustment: The external tap selector switch allows you to set the speaker's output power (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for 70.7V systems. Adjust this setting to achieve the desired sound masking level in the coverage area.
• Systemintegrasjon: The speaker will reproduce the sound masking signal provided by the connected sound masking generator or amplifier. Refer to your sound masking system's manual for overall system operation.

Vedlikehold

The Atlas Sound M1000 speaker requires minimal maintenance.

• Rengjøring: Periodically inspect the speaker and enclosure for dust accumulation. Clean with a soft, dry cloth. Do not use liquid cleaners directly on the speaker components.
• Undersøkelse: Annually inspect wiring connections and mounting hardware to ensure they remain secure.
• Miljøforhold: Ensure the speaker is operated within its specified environmental conditions. It is designed for plenum spaces.

Feilsøking

If you experience issues with your M1000 sound masking speaker, consider the following:

• Ingen lydutgang:
  • Verify that the sound masking system ampkjøleren er slått på og fungerer som den skal.
  • Sjekk alle ledningsforbindelser fra amplifier to the speaker for continuity and secure termination.
  • Ensure the tap selector switch on the M1000 is not set to "OFF" and is set to a desired wattage (e.g., 0.25W, 0.5W, 1.0W, 2.0W, 4.0W).
  • Bekreft inngangsvoltage er 70.7V.
• Low Sound Output:
  • Adjust the tap selector switch to a higher wattage innstilling.
  • Check the output level of the sound masking system amplivligere.
• Forvrengt lyd:
  • Ensure the input signal from the sound masking system is not overdriving the speaker.
  • Inspect the speaker cone for any physical damage.

If issues persist, contact Atlas Sound technical support.

Spesifikasjoner

Figur 2: Dimensions of the Atlas Sound M1000 speaker, measuring 11.5" D x 11.5" W x 5.5" H.

Garantiinformasjon

The Atlas Sound M1000 speaker comes with a Limited Warranty. For specific terms and conditions, please refer to the official Atlas Sound warranty documentation provided with your purchase or visit the Atlas Sound webnettstedet. Denne garantien dekker vanligvis material- og produksjonsfeil ved normal bruk.

Support og kontakt

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Atlas Sound customer support:

• Produsent: Atlas Sound
• Webnettsted: www.atlassound.com
• Refer to your product packaging or the Atlas Sound webnettstedet for den mest oppdaterte kontaktinformasjonen.