Introduksjon
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your shift 3 Bluetooth Hands-Free Auto Speaker Black Series. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Image: The shift 3 Bluetooth Hands-Free Auto Speaker, a compact black device with a metallic trim, featuring a speaker grille, control buttons, and a clip for attachment. This image shows the front view av høyttaleren.
Oppsett
1. Lading av enheten
The shift 3 speaker is powered by an internal battery. Before first use, fully charge the device using the provided power adapter. Connect the power adapter to the speaker's charging port and plug it into a standard wall outlet. The charging indicator light will typically show the charging status and turn off or change color when fully charged.
2. Førstegangsplassering
As a tabletop mount device, place the speaker on a stable, flat surface. For in-car use, utilize its design for convenient placement, ensuring it does not obstruct your view eller forstyrre kjørekontrollene.
3. Bluetooth-paring
- Sørg for at høyttaleren er ladet og slått på.
- Aktiver Bluetooth på smarttelefonen, nettbrettet eller annen kompatibel enhet.
- Put the shift 3 speaker into pairing mode. This usually involves pressing and holding the Bluetooth button or power button until an indicator light flashes rapidly or a voice prompt confirms "pairing mode."
- On your device, search for available Bluetooth devices. Select "shift 3" or a similar name from the list.
- Once connected, the speaker will typically provide an audible confirmation, and the indicator light will change to a steady blue.
Note: If prompted for a passcode, enter "0000" (four zeros).
Bruksanvisning
Slå på/av
- To turn on: Press and hold the power button until the indicator light illuminates.
- To turn off: Press and hold the power button until the indicator light turns off.
Håndfri oppringing
- Besvare et anrop: When a call comes in, press the multi-function button (often marked with a phone icon) once to answer.
- Avslutte en samtale: Under en samtale trykker du én gang på multifunksjonsknappen for å avslutte samtalen.
- Avvise en samtale: Trykk og hold inne multifunksjonsknappen i omtrent 2 sekunder for å avvise et innkommende anrop.
- Ringe siste nummer på nytt: Double-press the multi-function button to redial the last number called.
- Stemmekontroll: If supported by your connected device, you may activate voice assistants (e.g., Siri, Google Assistant) by pressing and holding a dedicated voice control button or the multi-function button.
Lydavspilling
- Spill av/pause: Trykk én gang på multifunksjonsknappen for å spille av eller sette lyden på pause.
- Volumkontroll: Use the volume up (+) and volume down (-) buttons on the speaker to adjust the audio level.
- Neste / forrige spor: Some models may have dedicated buttons or require a long press of the volume buttons to skip tracks. Refer to your device's specific button layout.
Vedlikehold
Rengjøring
Wipe the exterior of the speaker with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid getting moisture into any openings.
Batteripleie
- For å bevare batteriets levetid, unngå å utlade batteriet helt ofte.
- Oppbevar enheten på et kjølig og tørt sted når den ikke er i bruk over lengre tid.
- Recharge the battery at least once every three months if not used regularly.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Enheten slås ikke på. | Batteriet er utladet. | Lad enheten med den medfølgende strømadapteren. |
| Kan ikke pare med Bluetooth-enhet. | Speaker not in pairing mode; Bluetooth on source device is off or too far; previously paired device interfering. | Ensure speaker is in pairing mode. Turn Bluetooth off and on again on your source device. Move devices closer. Disconnect from other Bluetooth devices. |
| Poor audio quality during calls (squealing/whining). | Interference; microphone issues; device malfunction. | Move away from other electronic devices. Ensure speaker is positioned correctly. If problem persists, contact customer support. |
| Ingen lyd fra høyttaleren. | Volumet er for lavt; enheten er ikke tilkoblet; lydkilden er satt på pause. | Increase volume on both speaker and connected device. Verify Bluetooth connection. Check if audio is playing on the source device. |
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnavn | shift 3 |
| Vare modellnummer | 4326596135 |
| Merke | Bluetooth |
| Høyttalertype | Surround Sound |
| Spesialfunksjon | Håndfri |
| Kompatible enheter | Projector, Laptop, MP3 Player, Desktop, Television, Tablet, Smartphone |
| Kontrollertype | Knapp |
| Surround Sound Channel Configuration | 3.0 |
| Farge | Svart |
| Inkluderte komponenter | Power adapter, User manual |
| Er vanntett | FALSK |
| Garantitype | Begrenset |
| Kontrollmetode | Stemme |
| Trådløs kommunikasjonsteknologi | Bluetooth |
| Strømkilde | Batteridrevet |
| Type lyddriver | Dynamisk driver |
| Tilkoblingsprotokoll | Bluetooth |
| UPC | 694202203835 |
| Produsent | Bluetooth |
| Pakkedimensjoner | 10.3 x 8.8 x 2.5 tommer |
| Varevekt | 10.4 unser |
| ASIN | B002SDA1BA |
| Dato først tilgjengelig | 27. november 2009 |
| Tilkoblingsteknologi | Bluetooth |
| Lydutgangsmodus | Stereo |
| Monteringstype | Bordfeste |
Garanti og støtte
The shift 3 Bluetooth Hands-Free Auto Speaker comes with a Begrenset garanti. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting beyond this manual, or warranty claims, please contact the manufacturer, Bluetooth, through their official support channels. This product includes a user manual as part of its components.