Brukerhåndbok for InFocus IN102 bærbar DLP-projektor

1. Introduksjon

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Nøkkelfunksjoner inkluderer:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Langvarig lamp and filter-free design for reduced maintenance.

2. Hva er i esken

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Strømledning
• VGA-kabel
• Bæreveske
• Fjernkontroll
• Sikkerhetsinstruksjoner
• CD Quick Start/User Guide

3. Produktet er overview

Figur 3.1: Foran View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Figur 3.2: Bak View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Figur 3.3: Øverst View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Figur 3.4: Nederst View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Oppsett

4.1 Plassering

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Koble til strøm

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Koble den andre enden av strømledningen til en jordet stikkontakt.

4.3 Koble til videokilder

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• S-Video: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Sammensatt video: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Sørg for at alle kablene er ordentlig tilkoblet før du slår på projektoren.

5. Bruksanvisning

5.1 Strøm på/av

1. For å slå på, trykk på Makt button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. For å slå av, trykk på Makt button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 Valg av inngangskilde

Trykk på Kilde button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Bildejustering

• Fokus og zoom: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Keystone-korreksjon: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Lysstyrke og Kontrast: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Øko-modus

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D-funksjonalitet

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Vedlikehold

6.1 Lamp Erstatning

Projektoren lamp har en begrenset levetid. Når lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Trekk ut strømledningen.
3. Locate and open the lamp cover on the top of the projector.
4. Fjern forsiktig den gamle lamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Sikre lamp deksel og plugg inn strømledningen.
6. Tilbakestill lamp timeren i projektorens OSD-meny.

6.2 Rengjøring

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Oppbevaring

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7. Feilsøking

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Sjekk tilkoblinger: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Bruk Kilde button on the projector or remote to select the correct input channel corresponding to your connected device.
• Skjerminnstillinger for datamaskin: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7, eller F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Projektor Lamp: Bekreft lamp indicator light. If it's red or blinking, the lamp kan trenge utskifting.

7.2 Projector Shuts Off Unexpectedly

• Overoppheting: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Problemer: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Strømforsyning: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Problemer med bildekvalitet

• Uskarpt bilde: Adjust the focus ring on the projector lens.
• Forvrengt bilde (trapesformet): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Fjernkontrollen fungerer ikke

• Batterier: Bytt batteriene i fjernkontrollen.
• Synslinje: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Spesifikasjoner

9. Garanti og støtte

9.1 Begrenset garanti

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Projektor: 5 års begrenset garanti
• Deler og arbeidskraft: 2-year coverage
• Lamp: 6-måneders begrenset garanti

Ta vare på kjøpsbeviset for garantikrav.

9.2 Kundestøtte

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webnettstedet.