DigiTech BP90

DigiTech BP90 Bass Guitar Multi-Effects Processor

Brukerhåndbok

Introduksjon

The DigiTech BP90 is a compact multi-effects pedal designed specifically for bass guitar. It integrates a wide array of effects, amplifier and cabinet models, a drum machine, a chromatic tuner, and an expression pedal into a single unit, offering comprehensive tonal control and practice tools for bassists.

Sikkerhetsinformasjon

  • Ensure the correct power supply is used (9V DC, 300mA). Using an incorrect power supply can damage the unit and void the warranty.
  • Ikke utsett enheten for regn eller fuktighet for å unngå brann eller elektrisk støt.
  • Unngå å plassere enheten i nærheten av varmekilder som radiatorer, varmeventiler, ovner eller andre apparater (inkludert ampløftere) som produserer varme.
  • Beskytt strømledningen mot å bli tråkket på eller klemt, spesielt ved støpsler, stikkontakter og punktet der de kommer ut av apparatet.
  • Rengjør kun med en tørr klut.
  • Overlat all service til kvalifisert servicepersonell. Service er nødvendig når apparatet har blitt skadet på noen måte, for eksempel strømledning eller støpsel er skadet, væske har blitt sølt eller gjenstander har falt inn i apparatet, apparatet har vært utsatt for regn eller fuktighet, ikke fungerer normalt , eller har blitt droppet.

Nøkkelfunksjoner

  • 32 Bass effects
  • 11 Amp modeller
  • 5 Cabinet models
  • 100 Presets (50 Factory / 50 User)
  • Built-in drum machine with 40 different patterns
  • Built-in expression pedal for real-time control over wah, volume, and DigiTech Whammy effects
  • Built-in chromatic tuner
  • Independent Left/Right outputs
  • Hjelpeinngang
  • Dedicated headphone output
  • Strømforsyning inkludert

Kontroller og tilkoblinger

Frontpanelet overview

Front view of the DigiTech BP90 Bass Guitar Multi-Effects Processor

Figur 1: Foran view of the DigiTech BP90, showing the display, control buttons, and footswitches.

The front panel of the BP90 features a clear LED display for showing preset numbers and parameter values. Below the display are several control buttons for navigating menus and adjusting settings, including "EDIT", "TONE LIBRARY", "EFFECTS LIBRARY", "EFFECTS LEVEL", "MASTER LEVEL", and "STORE". Two footswitches are located at the bottom left for preset changes and bypass, while a large expression pedal is on the right for real-time effect control.

Ekspressjonspedal

Vinklet view of the DigiTech BP90 showing the expression pedal

Figur 2: Vinklet view of the DigiTech BP90, highlighting the integrated expression pedal.

The integrated expression pedal allows for dynamic control over various effects such as Wah, Volume, and the unique DigiTech Whammy effect. Its robust design ensures reliable performance during live use or practice sessions.

Tilkoblinger på bakpanelet

Bak view of the DigiTech BP90 showing input and output jacks

Figur 3: Bak view of the DigiTech BP90, displaying all input and output jacks.

The rear panel provides all necessary connections for the BP90. These include the INNGANG jack for your bass guitar, VENSTRE (MONO) og RETT UT jacks for connecting to an amplifier or mixer, an AUX IN jack for external audio sources, a dedicated HODETELEFON UT jack for silent practice, and the 9VDC 300mA strøminngang.

Oppsett

  1. Koble bassgitaren din til INNGANG jack on the rear panel of the BP90.
  2. Koble til LEFT (MONO) OUT jack to your bass amplifier's input or a mixer. For stereo output, connect both IGJEN og RETT UT jacks to a stereo ampovn eller mikser.
  3. If desired, connect an external audio source (e.g., MP3 player) to the AUX IN jack for practice along with music.
  4. For stille øving, koble hodetelefoner til HODETELEFON UT jack.
  5. Koble den medfølgende 9V DC-strømforsyningen til 9VDC 300mA input on the rear panel and then plug it into a wall outlet. The unit will power on automatically.

Bruksanvisning

Navigering av forhåndsinnstillinger

The BP90 comes with 100 presets, divided into 50 factory presets (51-100) and 50 user presets (01-50). Use the footswitches to cycle through presets. Pressing both footswitches simultaneously typically engages the bypass mode, allowing your clean bass signal to pass through.

Editing Effects and Amp Modeller

Trykk på REDIGERE button to enter edit mode. Use the TONE LIBRARY og EFFECTS LIBRARY buttons to select different amp models, cabinet models, and individual effects. Adjust parameters using the VERDI knob (or corresponding buttons). The EFFECTS LEVEL og MASTERNIVÅ controls adjust the overall effect mix and output volume, respectively. Remember to press LAGER to save your changes to a user preset location (01-50).

Using the Drum Machine

The BP90 includes 40 built-in drum patterns for practice. Activate the drum machine by pressing the TROMMER button. Use the controls to select different patterns and adjust the tempo. This feature is ideal for developing rhythm and timing.

Innebygd kromatisk tuner

The integrated chromatic tuner allows for accurate tuning of your bass. Refer to the display for tuning indications. The tuner typically mutes the output signal when engaged, allowing for silent tuning.

Expression Pedal Functions

The expression pedal can be assigned to control various parameters within a preset, such as wah intensity, volume level, or the pitch shift of the Whammy effect. Consult the detailed manual for specific instructions on assigning and calibrating the expression pedal for different effects.

Vedlikehold

  • Hold enheten ren ved å tørke den av med en myk, tørr klut. Unngå bruk av slipende rengjøringsmidler eller løsemidler.
  • Store the BP90 in a cool, dry place away from direct sunlight and extreme temperatures.
  • Når den ikke er i bruk over lengre tid, koble fra strømforsyningen.
  • Regularly check all cables and connections for wear and tear to ensure optimal performance and safety.

Feilsøking

ProblemMulig årsakLøsning
Ingen lydutgang.Incorrect connections, low volume, unit in tuner/bypass mode.Check all cable connections. Ensure Master Level is up. Exit tuner mode or bypass mode by pressing footswitches.
Forvrengt eller støyende lyd.Input level too high, faulty cables, incorrect power supply.Adjust input level on your bass or the BP90. Try different cables. Ensure you are using the correct 9V DC 300mA power supply.
Enheten slås ikke på.Power supply not connected, faulty power supply or outlet.Verify power supply is securely connected to the unit and a working power outlet. Test the outlet with another device.
Expression pedal not responding.Pedal not assigned to a parameter, calibration issue.Ensure the expression pedal is assigned to the desired effect parameter within the preset. Refer to the full manual for calibration procedures.

Spesifikasjoner

  • Varevekt: 1.52 pund
  • Produktdimensjoner: 6.5 x 8.5 x 2 tommer
  • Modellnummer: BP90
  • Farge: Svart/Rød
  • Maskinvaregrensesnitt: HP-HSC
  • Signalformat: Analog
  • Strømkilde: Elektrisk med ledning
  • Voltage: 9V
  • Første tilgjengelige dato: 24. juni 2010

Garanti og støtte

For detailed warranty information and technical support, please refer to the official DigiTech webnettstedet eller kontakt kundeservicen deres. Ta vare på kjøpsbeviset for eventuelle garantikrav.

Du kan ofte finne flere ressurser, vanlige spørsmål og fastvareoppdateringer på produsentens støttesider.

© 2024 DigiTech. Alle rettigheter forbeholdt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.