Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Introduksjon

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Viktig sikkerhetsinformasjon

For å redusere risikoen for brann, elektrisk støt eller personskade, følg alltid disse grunnleggende sikkerhetsreglene:

• ADVARSEL: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Denne lampen er kun beregnet for innendørs bruk.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Håndter glasskomponenter forsiktig for å unngå brudd.
• Advarsel for forslag 65: Dette produktet kan inneholde kjemikalier som er kjent i staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskade.

3. Pakkens innhold

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Inkluderte komponenter:

• Mounting strap for outlet box
• Monteringsutstyr (skruer, trådmuttere)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Installasjonsinstruksjonsark

Merk: Lyspærer er ikke inkludert og må kjøpes separat.

4. Installasjonsinstruksjoner

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Slå av strømmen: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Forbered montering: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Ledningstilkoblinger: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Sørg for at alle tilkoblinger er sikre.
4. Monteringsarmaturhus: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Installer lyspærer: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Fest glassskjermen: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Gjenopprett kraften: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• På/av: Bruk den tilkoblede veggbryteren for å slå lysarmaturen av eller på.
• dimming: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Vedlikehold

Regelmessig vedlikehold vil bidra til å bevare utseendet og funksjonaliteten til lampen din.

• Rengjøring: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Bytte av pære:
  1. Slå av strømmen til armaturen ved sikringen.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Gjenopprett strømmen til armaturet.

7. Feilsøking

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Produktspesifikasjoner

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Figur 5: Nærbilde view of the brushed nickel finial at the base of the glass shade.

Figur 6: Nærbilde view of the brushed nickel rim of the fixture.

9. Garantiinformasjon

This Progress Lighting fixture is backed by a 1 års begrenset garanti. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Kundestøtte

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Besøk butikken