Brukerhåndbok for InFocus IN112 bærbar DLP-projektor

1. Introduksjon

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Hva er i esken

Kontroller at alle varene som er oppført nedenfor er inkludert i produktemballasjen:

• InFocus IN112 Projector
• Strømledning
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Sikkerhetsinstruksjoner
• Brukerhåndbok (dette dokumentet)
• Fjernkontroll

3. Projektor overview

Figur 1: Øverst View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Figur 2: Side View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Figur 3: Vinklet View med fjernkontroll - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Figur 4: Bak View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Oppsett

4.1 Plassering

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Strømtilkobling

1. Koble den medfølgende strømledningen til projektorens strøminntak.
2. Koble den andre enden av strømledningen til en jordet stikkontakt.

4.3 Tilkobling av inngangskilder

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Sammensatt video: Use the A/V cable to connect to devices with composite video output.
• S-video: Connect to devices with S-Video output.
• Lyd inn: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Sørg for at alle kablene er ordentlig tilkoblet før du slår på projektoren.

5. Bruksanvisning

5.1 Strøm på/av

• For å slå på, trykk på Makt button on the control panel or remote control. The power indicator light will illuminate.
• For å slå av, trykk på Makt button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Bildejustering

• Fokus: Roter fokusringen på projektorlinsen til bildet er skarpt og klart.
• Keystones: Bruk Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Kildevalg

Trykk på Kilde button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Menynavigasjon

Trykk på Meny/Avslutt -knappen for å få tilgang til skjermmenyen (OSD). Bruk piltastene til å navigere, og Velge or Gå -knappen for å bekrefte valgene. Trykk på Meny/Avslutt igjen for å lukke menyen.

5.5 Øko-modus

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Vedlikehold

6.1 Lamp Erstatning

Projektoren lamp har en begrenset levetid. Når lamp indikator (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Forsiktighet: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Rengjøring

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Feilsøking

8. Spesifikasjoner

9. Garanti og støtte

9.1 Produktgaranti

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5 års begrenset garanti på projektoren.
• 2 års full garanti dekker deler og arbeid.
• 6 måneders garanti på lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webnettstedet.

9.2 Teknisk støtte

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webnettstedet eller i den medfølgende dokumentasjonen.

10. Related Product Information (IN130 Series)

Følgende video gir en oversiktview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.