Brukerhåndbok for InFocus IN116 bærbar DLP-projektor

1. Introduksjon

This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

Pakkeinnhold

Bekreft at alle varene som er oppført nedenfor er inkludert i pakken din:

• InFocus IN116 Projector
• Strømledning
• RGB-kabel
• A / V-kabel
• Sikkerhetsinstruksjoner
• Brukerhåndbok (dette dokumentet)
• Fjernkontroll
• HDMI-kabel

2. Produktet er overview

The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.

Nøkkelfunksjoner

• WXGA (1280 x 800) Native Resolution
• 2700 ANSI Lumens (2200 lumens in Eco Mode)
• 3000: 1 Kontrastforhold
• 3D-Ready functionality
• HDMI-tilkobling
• Langvarig lamp for utvidet bruk
• Easy maintenance with no filters to replace

Projektorkomponenter

Bilde 1: Topp View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.

Bilde 2: Side View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.

Bilde 3: Foran View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.

Bilde 4: Bak View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.

3. Installasjonsinstruksjoner

Plassering

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.

Koble til en strømkilde

1. Koble strømledningen til projektorens strøminntak.
2. Koble den andre enden av strømledningen til en jordet stikkontakt.

Koble til videokilder

The IN116 projector offers multiple input options:

• HDMI: For digital video and audio. Connect an HDMI cable from your source device to the projector's HDMI port.
• VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
• Sammensatt video: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
• S-video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.

For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.

4. Bruksanvisning

Slår på/av

1. For å slå på, trykk på Makt button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. For å slå av, trykk på Makt button twice. The projector will enter a cooling cycle before shutting down completely.

Velge en inngangskilde

Trykk på Kilde button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.

Justering av bildet

• Fokus: Roter fokusringen på projektorlinsen til bildet er skarpt og klart.
• Zoom: Juster zoomringen på projektorlinsen for å endre bildestørrelsen.
• Keystone-korreksjon: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
• Bildemoduser: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.

Øko-modus

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.

3D-funksjonalitet

The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.

5. Vedlikehold

Lamp Erstatning

Projektoren lamp har en begrenset levetid. Når lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.

1. Power off the projector and disconnect the power cord.
2. Allow the projector to cool down completely (at least 30 minutes).
3. Locate and open the lamp door on the top of the projector.
4. Fjern forsiktig den gamle lamp modul.
5. Installer den nye lamp module, ensuring it is securely seated.
6. Lukk lamp door and reconnect the power cord.
7. Tilbakestill lamp timeren i projektorens OSD-meny.

Forsiktighet: Projektor lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.

Rengjøring

• Ytre: Bruk en myk, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
• Linse: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
• Filtre: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.

6. Feilsøking

7. Spesifikasjoner

8. Garanti og støtte

Begrenset garanti

All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:

• Projektor: 5 års begrenset garanti
• Deler og arbeidskraft: 2 års full garanti
• Lamp: 6 måneders garanti

For detailed terms and conditions of the warranty, please refer to the official InFocus webnettstedet eller kontakt kundestøtte.

Kundestøtte

For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webnettsted for kontaktinformasjon og ytterligere ressurser.

Offisiell Webnettsted: www.infocus.com