Showtec LED Par 64 Short Q4-18 Svart Brukermanual

1. Introduksjon

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Sikkerhetsinformasjon

Følg alltid følgende sikkerhetsregler for å redusere risikoen for elektrisk støt, brann eller personskade:

• Sørg for at enheten er koblet til et jordet strømuttak med riktig volum.tage (2.4E+2 Volts AC).
• Ikke utsett enheten for regn eller fuktighet.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Sørg for tilstrekkelig ventilasjon rundt enheten for å forhindre overoppheting.
• Unngå direkte øyeeksponering for lyskilden.
• Koble alltid fra strømforsyningen før rengjøring eller vedlikehold.
• Håndter enheten forsiktig. Unngå å miste den i bakken eller utsette den for harde støt.

3. Produktet er overview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key views av produktet:

Figur 3.1: Foran view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Oppsett

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Montering: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Strømtilkobling: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX-tilkobling (valgfritt): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Første oppstart: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Drift

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Kontrollpanel overview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• Modus: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Oppsett: Enters/confirms settings within a selected mode.
• Opp: Navigerer oppover gjennom menyalternativer eller øker parameterverdier.
• Ned: Navigerer nedover gjennom menyalternativer eller reduserer parameterverdier.

5.2 DMX-kontroll

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Frittstående moduser

Use the 'Mode' button to select standalone programs. These may include:

• Automatiske programmer: Pre-programmed light shows that run automatically.
• Lyd aktiv: The light reacts to ambient sound via a built-in microphone.
• Statisk farge: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Vedlikehold

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Rengjøring: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp klut kan brukes. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Rengjøring av linse: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Bytte sikring: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• Undersøkelse: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Feilsøking

Denne delen tar for seg vanlige problemer du kan støte på.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Spesifikasjoner

9. Garanti og støtte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webnettstedet. Ta vare på kjøpsbeviset for eventuelle garantikrav.

Produsent: Showtec

Webnettsted: www.highlite.com/en/brands/showtec