Introduksjon
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Sikkerhetsinformasjon
- Bruk alltid enheten på en sikker måte.
- Ikke utsett enheten for ekstreme temperaturer eller fuktighet.
- Oppbevares utilgjengelig for barn.
- Kast batteriene på riktig måte i henhold til lokale forskrifter.
- Ikke forsøk å modifisere eller reparere enheten selv. Kontakt kvalifisert servicepersonell.
Pakkeinnhold
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Oppbevaringsboks
- Brukerhåndbok (dette dokumentet)
Note: A 9V battery is required for operation and is sold separately.
Oppsett: Batteriinstallasjon
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Finn batteridekselet, vanligvis på håndtaket eller baksiden av enheten.
- Skyv eller løsne dekselet for å åpne rommet.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Sett batteridekselet godt på plass.
- Enheten er nå klar til bruk.
Bruksanvisning
Slår på/av
- For å slå på detektoren ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- For å slå på detektoren AV, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Sensitivitetsreduksjon
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Varsel om lavt batteri
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Funksjoner
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Varsel om lite batteri.
- Comes with a handy carrying case.
Vedlikehold
- Rengjøring: Tørk av detektoren med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
- Lagring: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Batteri: Fjern batteriet hvis enheten ikke skal brukes over lengre tid for å forhindre lekkasje og skade.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Detektoren slår seg ikke på. | Batteriet er dødt eller feil installert. | Check battery polarity. Replace with a fresh 9V battery. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
Spesifikasjoner
| Merke | Cen-Tech |
| Modellnummer | 94138 |
| Strømkilde | 9V batteri (ikke inkludert) |
| Deteksjonstype | Metall |
| Wand Size | 6 tommer |
| Varsler | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Spesielle funksjoner | 50% Sensitivity Reduction Button |
| Dimensjoner | 16.5 x 5 x 2 tommer |
| Varevekt | 1.45 pund |
| Materiale | Wood, Metal (referring to detected materials) |
| Internasjonal beskyttelse vurdering | IP54 |
Garanti og støtte
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for eventuelle garantikrav.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.