Antec Eleven Hundred Super Mid Tower Computer Case Instruction Manual

1. Introduksjon

The Antec Eleven Hundred is a Super Mid Tower computer case designed to accommodate high-performance PC builds. It supports a wide range of components, including XL-ATX motherboards and multiple graphics card configurations. The case features an advanced cooling system with pre-installed fans and multiple additional fan mounts, along with efficient cable management solutions to ensure a clean and optimized internal layout.

2. Oppsett og komponentinstallasjon

This section provides instructions for installing various components into your Antec Eleven Hundred case.

2.1 Hovedkortinstallasjon

The Eleven Hundred case supports XL-ATX motherboards (up to 10.3 x 13.6 inches).

1. Prepare the motherboard tray by installing the necessary standoffs for your motherboard form factor.
2. Plasser hovedkortet forsiktig på avstandsstykkene, og juster skruehullene.
3. Fest hovedkortet med skruer.

2.2 Installasjon av grafikkort (GPU)

The case features nine expansion slots and can accommodate graphics cards up to 13 inches (330 mm) in length, supporting multi-GPU configurations (e.g., three-way NVIDIA SLI or four-way AMD CrossFireX™).

1. Fjern de nødvendige dekslene til utvidelsessporene fra baksiden av kabinettet.
2. Insert the graphics card into the appropriate PCIe slot on your motherboard.
3. Secure the graphics card with the provided thumb screws.

2.3 Installasjon av stasjon

The Eleven Hundred offers eleven drive bays: three 5.25-inch bays and six 3.5-inch tool-less bays. Additionally, there are two 2.5-inch drive mounts.

• 5.25-inch Drives: Utilize the tool-less mechanisms for easy installation of optical drives or other 5.25-inch devices.
• 3.5-inch Drives: The six 3.5-inch bays feature tool-less trays. Slide your hard drive into a tray and then slide the tray into the bay until it clicks into place.
• 2.5-inch Drives (SSDs): Dedicated mounts are available for 2.5-inch solid-state drives. Secure these drives with screws.

2.4 Cooling System and Fan Installation

The case includes a 200 mm blue LED top exhaust fan and a 120 mm rear exhaust fan. It also provides mounts for up to seven additional fans for enhanced cooling.

• Additional Fan Mounts: Strategic positions are available for optional fans, including an intake fan mount behind the motherboard tray for CPU cooling.
• Fan Power Hub: A convenient fan power hub allows connection of up to four 3-pin fans to a single Molex connector, simplifying cable management.
• Liquid Cooling Compatibility: The Eleven Hundred is compatible with Antec KÜHLER H2O liquid CPU coolers.

2.5 Kabelhåndtering

Effective cable management is crucial for airflow and aesthetics. The case provides 36 mm of space behind the motherboard tray and features grommet-lined cable routing holes.

1. Route power supply cables and data cables through the grommeted holes to the rear of the motherboard tray.
2. Bruk ample space behind the tray to organize and secure cables using cable ties.
3. Connect front panel I/O cables (USB 3.0, USB 2.0, HD Audio) to the corresponding headers on your motherboard. The two front USB 3.0 ports connect via internal motherboard connectors.

3. Drift

Once all components are installed and connected, close the side panels. Power on your system. The pre-installed fans will begin operating to provide cooling.

3.1 Frontpanel I/O

Frontpanelet gir enkel tilgang til:

• 2 x USB 3.0-porter
• 2 x USB 2.0-porter
• HD-lydkontakter (hodetelefoner og mikrofon)
• Strømknapp
• Tilbakestill-knapp

4. Vedlikehold

Regular maintenance helps ensure optimal airflow and component longevity.

4.1 Rengjøring av luftfiltre

The Eleven Hundred case is equipped with removable and washable air filters to prevent dust buildup.

• PSU Air Intake Filter: Located at the bottom of the case, beneath the power supply.
• Front Air Intake Filter: Located behind the quick-release front bezel.

For å rengjøre:

1. Fjern filtrene forsiktig.
2. Wash them with water and mild soap, or use a vacuum cleaner to remove dust.
3. Sørg for at filtrene er helt tørre før du monterer dem på nytt.

4.2 Generell rengjøring

Use a soft, dry cloth to wipe down the exterior of the case. For internal cleaning, use compressed air to remove dust from fans and components. Ensure the system is powered off and unplugged before performing any internal cleaning.

5. Feilsøking

Denne delen tar for seg vanlige problemer du kan støte på.

5.1 For mye viftestøy

If you experience unusual or excessive noise from the fans, particularly the top 200mm fan:

• Se etter hindringer: Ensure no cables or debris are interfering with the fan blades.
• Viftemontering: Verify that all fans are securely mounted and screws are tightened.
• Strømtilkobling: The included fans connect via Molex. If connected to a motherboard fan header, ensure fan speed settings in the BIOS/UEFI or operating system are appropriate.
• Komponentslitasje: Over time, fan bearings can wear out, leading to increased noise. Consider replacing the fan if it remains noisy after checking the above.

5.2 Dårlig luftstrøm eller overoppheting

If components are running hotter than expected:

• Rengjør filtre: Ensure all air intake filters are clean and free of dust.
• Kabeladministrasjon: Verify that internal cables are neatly routed and not obstructing airflow.
• Viftekonfigurasjon: Ensure fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top). Consider adding optional fans to improve cooling.
• Component Seating: Check that CPU coolers and GPU heatsinks are properly seated and making good contact.

6. Spesifikasjoner

7. Garanti og støtte

7.1 Produsentens garanti

The Antec Eleven Hundred computer case is backed by a manufacturer's tre års begrenset garanti, covering both parts and labor. Please retain your proof of purchase for warranty claims.

7.2 Kundestøtte

For technical assistance, warranty inquiries, or to report any issues, please contact Antec customer support. Refer to the official Antec webnettstedet for den nyeste kontaktinformasjonen og støtteressursene.