Progress Lighting P4441-20 Gather Chandelier Instruction Manual

1. Introduksjon

Thank you for choosing the Progress Lighting P4441-20 Gather Chandelier. This five-light chandelier features a smart simplicity with antique bronze metal arms that curve downwards to support white etched glass shades. The etched glass provides distinctive and pleasing illumination, making it a versatile addition to various home styles. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new lighting fixture.

Figure 1: Progress Lighting P4441-20 Gather Chandelier, Antique Bronze. This image displays the chandelier's five-light design with antique bronze finish and white etched glass shades.

2. Viktig sikkerhetsinformasjon

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringsskapet eller sikringsbryteren før installasjon eller service.

• Always consult a qualified electrician for installation if you are not comfortable with electrical wiring.
• Ensure all electrical connections comply with local codes and ordinances, and the National Electric Code (NEC).
• Dette produktet er kun beregnet for innendørs bruk i boliger.
• Ikke overskrid maksimumsverdientage spesifisert for pærene.
• Håndter glassskjermer forsiktig for å unngå brudd.
• Advarsel i henhold til Proposition 65: Dette produktet kan inneholde kjemikalier som er kjent i delstaten California for å forårsake kreft og fødselsskader eller andre reproduksjonsskader.

3. Hva er inkludert

Kontroller at alle komponenter er til stede før installasjonen starter:

• Chandelier Fixture (with pre-attached arms and wiring)
• White Etched Glass Shades (5 pieces)
• Mounting Hardware (crossbar, screws, wire nuts)
• Chain (42 inches of 9 gauge chain supplied)
• Canopy/Ceiling Plate
• Installasjonsark

Figure 2: Dimensional drawing of the P4441-20 Chandelier. This diagram illustrates the overall height (15 inches) and width (20.5 inches) of the fixture.

4. Oppsett og installasjon

Follow these general steps for installation. Refer to the included installation sheet for detailed diagrams and specific instructions.

1. Forbered for installasjon: Turn off power at the main circuit breaker or fuse box. Clear the work area and ensure you have all necessary tools (screwdriver, wire strippers, pliers, ladder).
2. Monter armatur: Carefully unpack the chandelier. The arms may need to be gently unfolded and positioned evenly. Attach the glass shades to each light socket.
3. Determine Chain Length: The chandelier comes with 42 inches of 9 gauge chain. Adjust the chain length to achieve the desired hanging height. For dining tables, the bottom of the chandelier should typically be 30-36 inches above the tabletop. For foyers or living rooms, ensure at least 7 feet of clearance from the floor to the bottom of the fixture. Use pliers to open and close chain links as needed.
4. Mounting the Crossbar: Secure the mounting crossbar to your electrical junction box using the provided screws.
5. Kabling: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
6. Sikker kalesje: Slide the canopy up the chain and secure it to the mounting crossbar, covering the electrical connections.
7. Installer pærer: Screw in the appropriate light bulbs (E26 base, max 100 watts per bulb, incandescent recommended).
8. Gjenopprett kraften: Slå på strømmen igjen ved strømbryteren.

Profesjonell installasjon anbefalt: For safety and optimal performance, it is highly recommended to have this fixture installed by a qualified electrician, especially if you are unfamiliar with electrical wiring.

Video 1: Progress Lighting Chandelier OverviewDenne videoen gir en generell oversiktview of Progress Lighting chandeliers, including insights into design and installation considerations.

Video 2: Brushed Nickel Collective Video. While showcasing a brushed nickel collection, this video may offer visual cues for general chandelier features and installation, applicable to the Gather series.

5. Bruksanvisning

The P4441-20 Gather Chandelier is designed for simple operation via a standard wall switch. It features five light sockets, providing ample belysning for rommet ditt.

• Slå på/av: Use your existing wall switch to turn the chandelier on or off.
• Dimbar funksjonalitet: This fixture is compatible with dimmer switches, allowing you to adjust the light intensity to create your desired ambiance. Ensure you use dimmable bulbs if connecting to a dimmer switch.
• Pæretype: Uses 5 incandescent bulbs with an E26 base, up to 100 watts each.

6. Vedlikehold

Regelmessig vedlikehold vil bidra til å bevare lysekronens utseende og funksjonalitet.

• Rengjøring: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. For the glass shades, use a mild glass cleaner on a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents that could damage the finish.
• Bytte av pære: Ensure the power is off and bulbs have cooled before replacing. Unscrew the old bulb and screw in a new E26 base bulb, not exceeding 100 watts.

7. Feilsøking

Hvis du støter på problemer med lysekronen din, kan du se følgende vanlige problemer og løsninger:

If problems persist, contact Progress Lighting customer service or a qualified electrician.

8. Spesifikasjoner

9. Garanti og støtte

This Progress Lighting P4441-20 Gather Chandelier is covered by a 1 års begrenset garanti. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please refer to the contact information provided on the original packaging or visit the official Progress Lighting webnettstedet.