RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produktet er overview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Nøkkelfunksjoner:

• Makt: 39-watt LED
• Fargetemperatur: 5100K Cool White
• Levetid: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Optikk: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektor: Semi-specular anodized aluminum
• Pakninger: Høytemperatur silikon
• Fullfør: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Sikkerhetsinformasjon

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Elektrisk sikkerhet: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Jording: The fixture must be properly grounded to prevent potential electric shock.
• Montering: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Driftstemperatur: Do not operate the fixture outside its specified temperature range.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Installasjon

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Nødvendig verktøy:

• Skrutrekker (Phillips og flathead)
• Wire strippere
• Tang
• Drill (if mounting surface requires pilot holes)
• Justerbar skiftenøkkel

Monteringsalternativer:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figur 2: Eksample of a Slipfitter Mount (optional accessory)

Installasjonstrinn:

1. Koble fra strømmen: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
2. Klargjør monteringsoverflaten: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Ledningstilkoblinger:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Festefeste: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Juster mål: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Gjenopprett kraften: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Drift

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standard drift:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figur 3: Eksample of a Photocell (optional accessory)

5. Vedlikehold

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Rengjøring:

• Ytre: Rengjør utsiden av armaturen med jevne mellomrom med en myk, tørr klut.amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Linse: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Undersøkelse:

• Inspiser armaturen med jevne mellomrom for tegn på skade, løse forbindelser eller slitasje.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Feilsøking

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Spesifikasjoner

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garanti og støtte

Produsentens garanti:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1 års produsentgaranti fra kjøpsdatoen. Denne garantien dekker material- og produksjonsfeil ved normal bruk og service.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Kundestøtte:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webnettstedet for oppdatert kontaktinformasjon.