Kuryakyn 3231

Kuryakyn 3231 LED Under Tour-Pak Light Instruction Manual

Modell: 3231

Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your Kuryakyn 3231 LED Under Tour-Pak Light. This accessory is designed to provide additional run and turn signal lighting for enhanced visibility and aesthetic integration on compatible motorcycles. Please read this manual thoroughly before installation and use.

Bak view of a red Honda Gold Wing motorcycle with the Kuryakyn 3231 LED Under Tour-Pak Light installed, showing the integrated lighting.

Figure 1: Kuryakyn 3231 LED Under Tour-Pak Light installed on a Honda Gold Wing.

Oppsett og installasjon

Kompatibilitet

  • Compatible with Honda Gold Wing GL1800 models from 2012-2017 (excluding F6B).
  • Requires a rear accessory harness (not included) for proper electrical connection.

Inkluderte komponenter

Kontroller at alle komponenter er til stede før installasjonen starter:

  • 1x Right Chrome Under Tour-Pak Accent with integrated LED light
  • 1x Left Chrome Under Tour-Pak Accent with integrated LED light
  • 1x "Y" Wiring Harness
  • 2x Alcohol Pads
  • 2x Dielectric Grease Packets
  • 6x buntebånd
  • 1x Y-Connector

Anbefalte verktøy (ikke inkludert)

  • Metric Hex Wrench Set
  • Basic hand tools (screwdrivers, wire cutters/strippers if needed)

Installasjonstrinn

  1. Preparat: Ensure the motorcycle is turned off and the ignition key is removed. Disconnect the negative terminal of the battery to prevent accidental electrical shorts during installation.
  2. Finn monteringsområdet: Identify the area under the Tour-Pak where the accent lights will be installed. Refer to your motorcycle's service manual for specific panel removal instructions if necessary.
  3. Ren overflate: Use the provided alcohol pads to thoroughly clean the mounting surfaces on the motorcycle. Allow the surface to dry completely. This ensures proper adhesion if adhesive backing is present on the accent pieces.
  4. Install Accent Pieces: Carefully position the Right and Left Chrome Under Tour-Pak Accents. Ensure they align correctly with the contours of the motorcycle. Secure them in place according to the product's design (e.g., using existing fasteners or adhesive backing).
    Nærbilde view of the Kuryakyn 3231 LED Under Tour-Pak Light unit, showing its chrome finish and LED strip.

    Figure 2: Close-up of the Kuryakyn 3231 LED accent light unit.

  5. Kablingstilkobling: Connect the LED lights from the accent pieces to the provided "Y" Wiring Harness. Apply dielectric grease to all electrical connections to protect against moisture and corrosion.
  6. Connect to Motorcycle Harness: Connect the "Y" Wiring Harness to the motorcycle's rear accessory harness (not included). This connection will integrate the LED lights with the motorcycle's existing run and turn signal circuits. Ensure all connections are secure.
  7. Sikker kabling: Use the provided cable ties to neatly route and secure all wiring, preventing it from interfering with moving parts or being exposed to excessive heat or abrasion.
  8. Testfunksjonalitet: Reconnect the motorcycle battery. Turn on the ignition and test the run and turn signal functions to ensure the new LED lights operate correctly.
  9. Sluttsamling: Reinstall any panels or covers that were removed during the installation process.

Bruksanvisning

The Kuryakyn 3231 LED Under Tour-Pak Lights are designed to operate automatically in conjunction with your motorcycle's existing electrical system. Once properly installed, they will function as follows:

  • Run Lights: When the motorcycle's ignition is on, the LED lights will illuminate, providing continuous additional rear lighting.
  • Blinklys: When the turn signal is activated, the corresponding LED light will flash in sync with the motorcycle's main turn signals.
Close-up of the Kuryakyn 3231 LED light strip, showing individual LED elements illuminated.

Figure 3: Illuminated LED strip detail.

Vedlikehold

To ensure the longevity and optimal performance of your Kuryakyn 3231 LED Under Tour-Pak Lights, follow these maintenance guidelines:

  • Rengjøring: Clean the chrome accent pieces and LED lenses regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the chrome or damage the LED lenses.
  • Inspeksjon av ledninger: Periodically inspect all wiring connections for tightness and signs of wear, corrosion, or damage. Ensure cable ties are secure and wires are not chafing against any surfaces.
  • Vanntett forsegling: While the product is waterproof, avoid directing high-pressure water sprays directly at the light units or electrical connections during washing.

Feilsøking

If you experience issues with your Kuryakyn 3231 LED Under Tour-Pak Lights, refer to the following common problems and solutions:

ProblemMulig årsakLøsning
Lysene lyser ikke.Loose electrical connection, blown fuse, incorrect wiring, faulty accessory harness.Check all wiring connections for tightness. Inspect the motorcycle's fuse box for a blown fuse related to accessory lighting. Verify wiring against the installation instructions. Ensure the rear accessory harness is correctly installed and functional.
Lights flicker or operate intermittently.Loose connection, corrosion at terminals, damaged wiring.Inspect all connections for looseness or corrosion. Clean terminals if necessary and apply dielectric grease. Check wiring for any cuts or damage.
Turn signals do not flash correctly.Incorrect wiring to turn signal circuit, incompatible flasher relay (unlikely with LED-compatible systems).Re-check the connection to the motorcycle's turn signal circuit. Ensure the accessory harness is correctly integrated.

Spesifikasjoner

TrekkDetalj
MerkeKuryakyn
Modellnummer3231
LyskildeLED
Spesielle funksjonerVanntett
PlasseringRear (Under Tour-Pak)
Varedimensjoner (L x B x H)48.3 x 8.9 x 8.9 cm (19 x XUMX x 3.5 inches)
KompatibilitetHonda Gold Wing GL1800 (2012-2017, excluding F6B)
Montering påkrevdNo (product itself), Installation on motorcycle required.
Side view of a red Honda Gold Wing motorcycle with the Kuryakyn 3231 LED Under Tour-Pak Light installed, highlighting its position.

Figur 4: Side view showing the placement of the Kuryakyn 3231 LED light.

Garantiinformasjon

Kuryakyn products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Kuryakyn webnettstedet eller kontakt kundeservicen deres. Ta vare på kjøpsbeviset for eventuelle garantikrav.

Kundestøtte

If you have any questions regarding the installation, operation, or troubleshooting of your Kuryakyn 3231 LED Under Tour-Pak Light, please visit the official Kuryakyn website for FAQs and support resources. You may also contact Kuryakyn customer service directly for assistance.

Webnettsted: www.kuryakyn.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.