JJC TMC LCD Timer Remote Control Instruction Manual

Introduksjon

The JJC TMC LCD Timer Remote Control is a versatile device designed for advanced camera control, functioning as both a remote shutter release and a programmable intervalometer. It is ideal for various photography techniques, including time-lapse, long exposure, and self-portraits, by preventing camera shake and offering precise timing control.

Produkt overview

Komponenter og kontroller

Familiarize yourself with the main components and controls of your JJC TMC remote control:

Bilde 1: Front view of the JJC TMC remote control with key components labeled, including the control panel, shutter release button, LED light/lock button, arrow buttons, timer start/stop button, and SET button.

Bilde 2: Detailed diagram illustrating the numbered parts of the JJC TMC controller and the various indicators on its LCD screen, such as selection cursor, timer display, LOCK indicator, low power indicator, timer active indicator, speaker ON/OFF, SET indicator, RELEASE indicator, and number of shots.

LCD-skjermindikatorer

• DE: Delay Timer (initial delay before sequence starts)
• BU: Bulb Timer (long exposure duration)
• INT: Interval Timer (time between shots)
• N: Number of Shots (total exposures)
• Selection Cursor: Indicates the currently adjustable parameter.
• Timerdisplay: Shows current time settings.
• LOCK Indicator: Appears when buttons are locked.
• Lavstrømsindikator: Varsler når batteriet er lavt.
• Timer Active Indicator: Shows when a timer sequence is running.
• Høyttaler PÅ/AV: Indicates audio feedback status.
• SET Indicator: Appears when a setting is being adjusted.
• RELEASE Indicator: Appears when the shutter is being released.

Oppsett

1. Installasjon av batteri

1. Finn batterirommet på baksiden av fjernkontrollen.
2. Skyv opp batteridekselet.
3. Sett inn to AAA-batterier, og sørg for at polariteten er riktig (+/-).
4. Lukk batteridekselet godt.

2. Koble til kamera

1. Ensure both the camera and the remote control are powered off.
2. Locate the remote control terminal on your Canon EOS camera (refer to your camera's manual for exact location).
3. Insert the remote control's cable plug firmly into the camera's remote control terminal.
4. Power on the remote control using the ON/OFF switch.

Bilde 3: The JJC TMC remote control connected to a Canon camera via its cable, demonstrating proper connection for operation.

Bruksanvisning

Basic Shutter Release Function

• Halvtrykk: Press the Shutter Release Button halfway down to activate autofocus.
• Full-presse: Press the Shutter Release Button completely down to trigger the camera's shutter.
• Shutter Lock (for Bulb mode): For long exposures in Bulb mode, press the Shutter Release Button fully down and slide it upwards to lock it. This keeps the shutter open until you slide it back down.

Programming Timer Functions

The remote control allows programming of four main timer functions: Delay (DE), Bulb (BU), Interval (INT), and Number of Shots (N).

1. Strøm på: Slå på fjernkontrollen med PÅ/AV-bryteren.
2. Velg parameter: Bruk Pilknapper (up/down) to move the selection cursor between DE, BU, INT, and N on the LCD display.
3. Juster verdi: Once a parameter is selected, press the SET-knapp. The digits will flash. Use the Pilknapper (left/right) to select the digit to change, and the Pilknapper (up/down) to adjust the value (hours, minutes, seconds).
4. Bekreft innstilling: Trykk på SET-knapp again to confirm the value and move to the next digit or parameter.
5. Set Number of Shots (N): For 'N', you can set a value from 1 to 399. To set for unlimited shots, select 'N' and adjust until '--' is displayed.
6. Start Timer Sequence: After setting all desired parameters, press the Timer start/stopp-knapp to begin the programmed sequence. The 'TIMER ACTIVE' indicator will appear.
7. Stop Timer Sequence: Trykk på Timer start/stopp-knapp again to stop an active sequence.

Lås Funksjon

To prevent accidental button presses during a timer sequence or long exposure, press the LED lys / låseknapp. The 'LOCK' indicator will appear on the LCD. Press it again to unlock.

Bakgrunnsbelysningsfunksjon

Trykk på LED lys / låseknapp briefly to activate the LCD backlight for visibility in low-light conditions. The backlight will automatically turn off after a few seconds.

Vedlikehold

• Rengjøring: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or solvents.
• Batteribytte: When the low power indicator appears, replace both AAA batteries promptly to ensure optimal performance.
• Lagring: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Kabelpleie: Avoid bending or twisting the connection cable excessively to prevent damage.

Feilsøking

Remote control does not power on:

Check if batteries are inserted correctly with proper polarity. Replace with fresh AAA batteries.

Camera does not respond to shutter release:

Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible shooting mode (e.g., P, Av, Tv, M, Bulb). Check camera battery level.

Timer sequence does not start or stops unexpectedly:

Confirm all timer parameters (DE, BU, INT, N) are set correctly. Ensure the 'TIMER ACTIVE' indicator is on. Check battery level. Note that turning off the remote control will reset all programmed settings.

LCD display is dim or blank:

Replace batteries. Use the backlight function in low light conditions.

Spesifikasjoner

Garanti og støtte

For warranty information and technical support, please refer to the official JJC webnettstedet eller kontakt forhandleren din. Ta vare på kjøpskvitteringen for garantikrav.