Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal User Manual

Introduksjon

The Electro-Harmonix Small Clone Analog Chorus Pedal is designed to produce lush, shimmering chorus tones. This pedal is renowned for its rich, warm analog sound, making it a valuable tool for guitarists seeking classic modulation effects. It offers a range of chorus effects from subtle shimmer to dramatic, swirling modulation, suitable for various musical styles.

Key features include true bypass for signal integrity, a 9V battery for power, and a pure analog circuit for authentic tone.

Hva er i esken

• Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal
• 9V batteri

Oppsett

Styring av pedalen

The Small Clone EH 4600 can be powered by a 9V battery (included) or an optional 9V DC power adapter (not included). To install the battery, remove the bottom plate of the pedal.

Tilkoblinger

The pedal features standard 1/4 inch (6.35mm) audio jacks for input and output.

1. Koble gitaren eller et annet instrument til INNGANG jekken på høyre side av pedalen.
2. Koble til PRODUKSJON jekken på venstre side av pedalen til din amplifier or the input of another effects pedal.

Bruksanvisning

The Small Clone EH 4600 features simple controls for easy tone shaping.

Kontroller

• RATE-knapp: This knob controls the speed of the chorus effect. Turning it clockwise increases the speed, while turning it counter-clockwise decreases it.
• DEPTH Switch: This switch controls the intensity or width of the chorus effect. The up position provides a deeper, more pronounced chorus, while the down position offers a more subtle effect.
• STATUS LED: Indicates when the effect is active.
• FOTBRYTER: Engages or bypasses the effect. The pedal features true bypass, ensuring your instrument's tone remains unaffected when the pedal is disengaged.

Offisiell produktvideo

Vedlikehold

To ensure optimal performance and longevity of your Small Clone EH 4600 pedal, follow these simple maintenance guidelines:

• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av pedalen. Unngå bruk av slipende rengjøringsmidler eller løsemidler.
• Batteribytte: If using battery power, replace the 9V battery when the STATUS LED dims or the effect performance degrades. To replace, carefully remove the four screws on the bottom plate, replace the battery, and reattach the plate.
• Lagring: Oppbevar pedalen på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer når den ikke er i bruk.

Feilsøking

If you encounter issues with your Small Clone EH 4600, try the following steps:

• Ingen lyd: Check all cable connections. Ensure the power supply (battery or adapter) is functioning correctly. Verify that your instrument and amplifier are working.
• Weak or Distorted Effect: Replace the 9V battery if it's low. Ensure all cables are fully inserted and not damaged.
• Uønsket støy: Try using a different power supply or a fresh battery. Ensure the pedal is not placed too close to other electronic devices that might cause interference.

Spesifikasjoner

Garanti og støtte

For warranty information, technical support, or further inquiries, please visit the official Electro-Harmonix store or contact their customer service directly.

Du finner mer informasjon og støtte på Electro-Harmonix-butikken.