FURUNO FUR-IF-NMEA2K2 NMEA 0183 til NMEA 2000-konverter brukerhåndbok

1. Introduksjon

This manual provides essential information for the proper installation, operation, and maintenance of the FURUNO FUR-IF-NMEA2K2 NMEA 0183 to NMEA 2000 Converter. This device facilitates bidirectional data conversion between NMEA 0183 and NMEA 2000 CAN bus systems, offering selectable high-speed modes for specific data types like heading and AIS.

Les denne håndboken nøye før du bruker produktet for å sikre sikker og effektiv drift.

2. Sikkerhetsinformasjon

Always observe the following precautions to prevent injury and damage to the equipment.

• Sørg for at strømmen er koblet fra før installasjon eller vedlikehold.
• Ikke utsett enheten for ekstreme temperaturer eller direkte sollys over lengre tid.
• Consult a qualified technician for any repairs beyond basic troubleshooting.
• Bruk kun spesifiserte strømkilder og kabler.

3. Oppsett og installasjon

The FUR-IF-NMEA2K2 converter is designed for straightforward integration into existing marine electronic systems. Proper installation is crucial for optimal performance.

3.1 Utpakking og inspeksjon

Upon receiving the unit, carefully unpack it and inspect for any signs of damage. Ensure all components are present.

3.2 Monteringssted

Select a mounting location that is dry, protected from direct weather exposure, and allows for adequate ventilation. Avoid areas with high vibration or electromagnetic interference.

3.3 Kablingstilkoblinger

The converter features connections for both NMEA 0183 and NMEA 2000 networks. Refer to the diagram below for proper wiring.

Figure 1: FURUNO FUR-IF-NMEA2K2 NMEA Data Converter. The image displays the converter unit with a circular NMEA 2000 connector on one end and multiple color-coded bare wires for NMEA 0183 connections on the other. The main body of the converter is black with a label indicating "NMEA DATA CONVERTER", "TYPE IF-NMEA2K2", "SER.NO. 001866", and options for "NORMAL" or "HIGH SPEED (CUT ORANGE)" operation.

3.3.1 NMEA 2000-tilkobling

Connect the circular NMEA 2000 connector to your vessel's NMEA 2000 backbone. Ensure a secure, watertight connection.

3.3.2 NMEA 0183-tilkobling

The bare wires are for NMEA 0183 input and output. Refer to your NMEA 0183 device's manual for specific wiring requirements. Common connections include:

• Data In (Rx): Connect to the NMEA 0183 Talker's Output (Tx).
• Data Out (Tx): Connect to the NMEA 0183 Listener's Input (Rx).
• Bakke: Connect to the common ground of the NMEA 0183 system.

3.4 High-Speed Mode Selection

The converter supports a high-speed mode for specific data types. To enable high-speed mode (e.g., for heading and AIS data), locate the orange wire and follow the instructions on the converter's label. Typically, this involves cutting or connecting the orange wire as indicated for "HIGH SPEED (CUT ORANGE)" or "NORMAL" operation.

Note: Incorrect selection may lead to data transmission errors. Consult your system's requirements before altering this setting.

4. Bruksanvisning

Once properly installed and powered, the FUR-IF-NMEA2K2 converter operates automatically, translating data between the connected NMEA 0183 and NMEA 2000 networks.

4.1 Slå på

Ensure all connections are secure. Apply power to the NMEA 2000 network. The converter will power on automatically as it draws power from the NMEA 2000 bus.

4.2 Data Flow

The converter transparently translates NMEA 0183 sentences to NMEA 2000 PGNs (Parameter Group Numbers) and vice-versa. Verify data reception on your connected NMEA 0183 and NMEA 2000 devices.

• NMEA 0183 to NMEA 2000: Data from NMEA 0183 talkers connected to the converter's input will be broadcast on the NMEA 2000 network.
• NMEA 2000 to NMEA 0183: Relevant NMEA 2000 PGNs will be converted into NMEA 0183 sentences and output via the converter's NMEA 0183 output wires.

5. Vedlikehold

The FUR-IF-NMEA2K2 converter is designed for minimal maintenance. Regular checks can help ensure long-term reliability.

• Periodisk inspeksjon: Annually inspect all cable connections for corrosion or damage. Ensure connections are tight.
• Rengjøring: If necessary, gently wipe the unit with a soft, damp klut. Ikke bruk sterke kjemikalier eller skurende rengjøringsmidler.
• Programvareoppdateringer: Check the FURUNO website periodically for any firmware updates for the converter. Follow specific instructions provided with any updates.

6. Feilsøking

If you experience issues with the converter, refer to the following troubleshooting guide before contacting support.

7. Spesifikasjoner

8. Support og garanti

For technical assistance or warranty inquiries, please contact FURUNO customer support. Refer to the official FURUNO webnettstedet for den mest oppdaterte kontaktinformasjonen og detaljer om garantipolicyer.

FURUNO Webnettsted: www.furuno.com