Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter Instruction Manual

1. Introduksjon

De Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter allows you to wirelessly stream audio from any Bluetooth-enabled device to your speaker system. This manual provides instructions for setting up, operating, and maintaining your device.

Bilde 1.1: Foran view av Amped Wireless BTSA1 adapter with its antenna.

Nøkkelfunksjoner

• Wirelessly stream audio to your speaker system from any Bluetooth-enabled device.
• Experience superior sound quality without audio interruptions.
• Simple plug-and-play setup.
• Compatible with any Bluetooth device and speakers with 3.5mm or RCA inputs.

2. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter
• Strømadapter
• 3.5mm (male) to RCA (male) cable
• Hurtiginstallasjonsveiledning

3. Oppsett

Follow these steps to connect your Amped Wireless BTSA1 adapter to your speaker system and pair your device.

3.1 Tilkobling av adapteren

1. Koble til strøm: Plug the provided power adapter into the "PWR" port on the back of the BTSA1 adapter and then into a wall outlet.
2. Connect to Speaker System:
   • For RCA input: Use the included 3.5mm to RCA cable. Connect the RCA ends to the "AUDIO OUT" ports (red and white) on the back of the adapter and the 3.5mm end to your speaker system's auxiliary input.
   • For 3.5mm input: Use a standard 3.5mm audio cable (not included). Connect one end to the "LINE OUT" port on the back of the adapter and the other end to your speaker system's 3.5mm auxiliary input.

Image 3.1: Rear panel connections of the BTSA1 adapter, including power, audio outputs, and antenna port.

Bilde 3.2: Side view illustrating the antenna connection and rear ports.

3.2 Pare en Bluetooth-enhet

1. Ensure the BTSA1 adapter is powered on. The "Connect" button on the front will illuminate.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to its Bluetooth settings.
3. Aktiver Bluetooth og søk etter tilgjengelige enheter.
4. Velg "Amped Wireless BTSA1" from the list of found devices.
5. Once connected, the indicator light on the adapter will change to confirm successful pairing.

Bilde 3.3: Foran view of the BTSA1 adapter, highlighting the 'Connect' button.

4. Bruk av adapteren

After successful pairing, you can begin streaming audio.

1. Ensure your speaker system is turned on and set to the correct input source (AUX, RCA, etc.) where the BTSA1 is connected.
2. Play audio from your Bluetooth-enabled device. The sound will now be transmitted wirelessly to your speaker system.
3. Adjust volume using your Bluetooth device or your speaker system's controls.

Note: Only one device can be actively connected to the BTSA1 adapter at a time. To connect a different device, disconnect the currently paired device from its Bluetooth settings, then initiate pairing from the new device.

5. Vedlikehold

De Amped Wireless BTSA1 adapter requires minimal maintenance.

• Oppbevar enheten på et tørt sted, unna direkte sollys og ekstreme temperaturer.
• Rengjør utsiden med en myk, tørr klut. Ikke bruk flytende rengjøringsmidler eller aerosoler.
• Sørg for god ventilasjon rundt enheten for å forhindre overoppheting.

6. Feilsøking

Hvis du støter på problemer med din Amped Wireless BTSA1 adapter, refer to the following common solutions:

7. Spesifikasjoner

8. Produktvideo overview

9. Garanti og støtte

For garantiinformasjon og teknisk støtte, vennligst se den offisielle Amped trådløs website or the contact details provided in the Quick Install Guide included with your product.