1. Introduksjon
Takk for kjøpetasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your amplivligere.
2. Sikkerhetsinformasjon
- Strømkilde: Use only the specified power adapter (18V DC, center negative).
- Ventilasjon: Sørg for god ventilasjon for å unngå overoppheting. Ikke blokker ventilasjonsåpningene.
- Fuktighet: Ikke utsett enheten for regn, fuktighet eller overdreven luftfuktighet.
- Håndtering: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
- Service: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.
- Høyttalertilkobling: Koble alltid til amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3. Produktet er overview
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
Kontroller på frontpanelet
- INNGANG: 1/4" mono jack to plug in your guitar.
- BASS: Controls the low frequency response.
- MIDT: Controls the mid frequency response.
- DISKANT: Controls the high frequency response.
- GEVINST: Controls the gain level.
- VOLUM: Kontrollerer utgangsvolumet.
- På / av bryter: Slår enheten på eller av.
Tilkoblinger på bakpanelet
- 18V DC: Plug in DC 18V adapter (center negative).
- TELEFON/LINJEUTGANG: 1/8" stereo jack, for using headphones or recording.
- AUX IN: 1/8" stereo jack, for connecting an external music player.
- FX LOOP RETUR: 1/4" mono jack, connect to your effects output jack.
- HØYTTALERUTGANG: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp og kraft amp).
4. Oppsett
- Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the amplivligere.
- Koble til strøm: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- Koble til gitar: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- Innledende innstillinger: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- Strøm på: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.
5. Bruksanvisning
- Justering av tone: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- Justere forsterkning: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- Justere volum: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp del.
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. Vedlikehold
- Rengjøring: Bruk en myk, tørr klut til å rengjøre amplifier's exterior. Do not use liquid cleaners or solvents.
- Lagring: Lagre ampOppbevar væsken på et tørt og kjølig sted, unna direkte sollys og ekstreme temperaturer.
- Rørpleie: As a hybrid amplifier, den preamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Ingen lyd | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| Svak eller forvrengt lyd | Faulty cable, incorrect impedance, worn preamp rør. | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | Jordsløyfe, defekt strømforsyning, forstyrrelser fra annen elektronikk. | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. Spesifikasjoner
- Utgang Wattage: 5 watt
- Strømkilde: Corded Electric (18V DC, center negative)
- Varevekt: 15.5 unser
- Produktdimensjoner: 2.34 x 5.03 x 2.95 tommer
- Kompatible enheter: Gitar
- Koblingstype: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- Høyttalerimpedans: 4-16 ohm
- Modellnummer: TANLA2
9. Produktvideoer
OriPure 5W Tube Guitar Amplifier Hode
Videobeskrivelse: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
Videobeskrivelse: Denne videoen gir en detaljert oversiktview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
Videobeskrivelse: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
JOYO Meteor II BanTamp XL Series Mini Amp Head 20 Watt
Videobeskrivelse: This video presents the JOYO Meteor II BanTamp XL Series Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
Videobeskrivelse: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
Videobeskrivelse: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. Garanti og støtte
For warranty information and technical support, please refer to the official Hotone webnettstedet eller kontakt din autoriserte forhandler. Ta vare på kjøpskvitteringen som kjøpsbevis.
