Wheelock WHST-H15

Wheelock WHST-H15 Paging Horn Instruction Manual

Model: WHST-H15

1. Introduksjon

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. Sikkerhetsinformasjon

ADVARSEL:

  • Installasjon og kabling må utføres av kvalifisert personell i samsvar med alle lokale og nasjonale elektriske forskrifter.
  • Disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure the mounting surface can adequately support the weight of the paging horn.
  • Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
  • Bruk kun spesifisert volumtage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. Pakkens innhold

Kontroller at alle komponenter er til stede og uskadet ved utpakking:

  • Wheelock WHST-H15 Paging Horn (1 unit)
  • Adjustable Mounting Bracket (pre-attached or separate)
  • Installation Hardware (screws, washers, nuts - quantity may vary)
  • Denne bruksanvisningen

4. Oppsett og installasjon

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Wheelock WHST-H15 Paging Horn with adjustable mounting bracket

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

  1. Velg plassering: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
  2. Sikker brakett: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
  3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 Kablingstilkoblinger

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

  1. Strømvalg: Finn voltage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltagDette valget kan skade enheten.
  2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
  3. Sikre tilkoblinger: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. Bruksanvisning

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

  1. Strøm på: Apply power to your audio amplifier or paging system.
  2. Testlyd: Initiate a test page or audio signal through your system.
  3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. Vedlikehold

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

  • Regelmessig inspeksjon: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
  • Rengjøring: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
  • Miljøvern: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. Feilsøking

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

ProblemMulig årsakLøsning
Ingen lydutgang
  • Ingen makt til amplivligere
  • Feil kabling
  • Feil voltage utvalg
  • Skadet horn
  • Sjekke ampstrømforsyning til heveren
  • Verify all wiring connections and polarity
  • Sørg for voltage selector matches system voltage
  • Contact Wheelock support if horn is damaged
Forvrengt eller lav lyd
  • Feil voltage utvalg
  • Amplifier output too low/high
  • Løse forbindelser
  • Bekreft voltage selector setting
  • Justere amplifier volum
  • Kontroller og sikre alle ledningsforbindelser
Horn not securely mounted
  • Løs monteringsutstyr
  • Feil installasjon
  • Tighten all screws and bolts on the mounting bracket
  • Re-evaluate mounting location and method

8. Spesifikasjoner

MerkeWheelock
ModellWHST-H15
Effektvurdering15 watt
Voltage Kompatibilitet25V, 70V, 100V (selectable)
MonteringJusterbar monteringsbrakett
MiljømessigVærbestandig
FargeBeige
Produktdimensjoner (LxBxH)11 x 11 x 11 tommer
Varevekt0.01 unser
Dato først tilgjengelig21. november 2013

9. Garanti og støtte

For warranty information and technical support, please refer to the official Wheelock webnettstedet eller kontakt kundeservicen deres direkte. Ta vare på kjøpskvitteringen som kjøpsbevis.

Wheelock Customer Support: Visit Eaton's Wheelock Webnettstedet