1. Produktet er overview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figur 1: Foran view of the Progress Lighting P6064-31 Wall Lantern.
2. Sikkerhetsinformasjon
ADVARSEL: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Ikke overskrid maksimumsverdientage spesifisert for pæren.
- Håndter glasskomponenter forsiktig for å unngå brudd.
- Hold brennbare materialer unna lysarmaturen.
3. Pakkens innhold
Kontroller at alle komponenter er til stede før installasjonen starter:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Monteringsmaskinvaresett
- Installasjonsark
4. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnummer | P6064-31 |
| Merke | Fremdriftsbelysning |
| Finish Type | Finished (Black) |
| Produktdimensjoner | 16.13 cm L x 9.25 cm B x 6.13 cm H |
| Varevekt | 4.63 pund |
| Monteringstype | Stikker ut |
| Vannmotstandsnivå | Vannbestandig |
| Lyskilde Wattage | 100 watt (maks.) |
| Voltage | 120 volt |
| Maksimal lysutgang | 1600 lumen |
| Lyskildetype | Incandescent (Medium Base) |
| Materiale | Aluminium |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Installasjonsinstruksjoner
5.1 Forhåndsinstallasjon
- Slå av strømmen ved strømbryteren eller sikringsskapet.
- Carefully unpack the fixture and inspect for any damage.
- Sørg for at alle delene som er oppført i avsnitt 3 er til stede.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Armaturstørrelse: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Monteringshøyde: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figur 3: Eksample of wall lantern placement for an entryway.
Figur 4: Eksample of wall lantern placement for a garage.
5.3 Kabling og montering
- Fest monteringsbraketten til koblingsboksen ved hjelp av de medfølgende skruene.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Stikk alle ledninger forsiktig inn i koblingsboksen.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Montering av pære
- Insert one medium base incandescent bulb (not included) into the socket.
- Ikke overskrid maksimumsverdientage på 100 watt.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Bruksanvisning
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Vedlikehold
To maintain the appearance and functionality of your fixture:
- Rengjøring: Slå av strømmen før rengjøring. Tørk av armaturen med en myk klut.amp klut. Ikke bruk slipende rengjøringsmidler eller løsemidler, da disse kan skade overflaten eller glasset.
- Bytte av pære: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Feilsøking
Hvis armaturen din ikke fungerer som den skal, kan du se følgende vanlige problemer:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lyset slår seg ikke på | Ingen strøm til armaturet | Check circuit breaker, wall switch, and wiring connections. |
| Pæren er utbrent | Bytt pære. | Sørg for at pæren er skrudd godt inn. |
| Flimrende lys | Løs pære eller ledningstilkobling | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Feil pære wattage | Sørg for at pæren er somtage is appropriate and not too low. |
9. Garanti og støtte
This Progress Lighting fixture is covered by a 1 års begrenset garanti. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webnettstedet.