ABB EQ B23 112-100 Energimåler Bruksanvisning

1. Introduksjon og overview

This manual provides instructions for the installation, operation, and maintenance of the ABB EQ B23 112-100 Energy Meter. This electronic meter is designed for accurate measurement of electrical energy in industrial and residential applications, facilitating energy management and cost analysis. It features an infrared (IR) interface for data communication with external systems.

The ABB EQ B23 112-100 is a calibrated electronic meter, suitable for direct execution of energy power measurements. It is built for reliability and precision in various electrical testing environments.

2. Sikkerhetsinformasjon

Viktig: Read all safety instructions before installation or operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Installasjon og vedlikehold må kun utføres av kvalifisert personell.
• Ensure the power supply is disconnected before performing any wiring or installation procedures.
• Verify all connections are secure and correct according to wiring diagrams.
• Ikke bruk enheten hvis den ser ut til å være skadet.
• Følg alle lokale og nasjonale elektriske forskrifter.

3. Produktfunksjoner

• Electronic meter type for precise energy measurement.
• Rated current: 5 A.
• Maximum current (IMAX): 65 A.
• Nominell voltage (N-L): 176 V to 276 V.
• Nominell voltage (L-L): 400 V.
• Infrared (IR) interface for data communication.
• Accuracy class B.
• Designed for DIN rail mounting.

4. Oppsett og installasjon

The ABB EQ B23 112-100 Energy Meter is designed for DIN rail mounting. Ensure the mounting location is dry, well-ventilated, and free from excessive vibration or extreme temperatures.

4.1 Montering av måleren

1. Ensure the DIN rail is securely installed in the desired location.
2. Align the meter's rear mounting clip with the DIN rail.
3. Trykk måleren godt ned på skinnen til den klikker på plass.

Figur 1: Bak view of the meter, illustrating the integrated DIN rail mounting clip. This clip allows for easy and secure attachment to standard DIN rails.

4.2 Kablingstilkoblinger

Advarsel: Disconnect all power before making any electrical connections. Refer to the wiring diagram provided with the product for specific connection details. The meter supports both single-phase and three-phase connections.

• Connect the incoming phase (L1, L2, L3) and neutral (N) wires to the designated terminals.
• Connect the outgoing load wires to the corresponding terminals.
• Ensure all terminal screws are tightened to the specified torque to prevent loose connections.
• The meter also includes terminals for pulse output and an infrared interface for communication.

Figur 2: Nederst view of the meter, showing the main power input/output terminals and auxiliary connections. These terminals are clearly labeled for correct wiring.

Figur 3: Øverst view of the meter, displaying additional terminals for phase connections (L1, L2, L3) and neutral (N). Proper connection to these terminals is crucial for accurate measurement.

5. Bruksanvisning

Once installed and powered, the meter will automatically begin measuring energy consumption. The front display provides real-time data and allows for basic interaction.

5.1 Skjerm og knapper

Figur 4: Foran view of the meter, highlighting the digital display and control buttons. The display shows various measurement parameters, and the buttons allow navigation through menus.

• Utstilling: Shows energy consumption (kWh), voltage, current, power, and other parameters.
• Navigasjonsknapper: Use the arrow buttons (left/right or up/down, depending on model) to scroll through different display parameters.
• OK -knapp: Typically used to confirm selections or enter sub-menus.

5.2 Infrared (IR) Interface

The meter is equipped with an infrared interface on its left side. This interface allows for communication with external devices, such as communication adapters or energy management systems (e.g., KNX), for data retrieval and configuration. Consult the specific communication adapter's manual for details on connecting and utilizing the IR interface.

Figur 5: Side view of the meter, indicating the location of the infrared (IR) communication interface. This port enables data exchange with compatible external devices.

6. Vedlikehold

The ABB EQ B23 112-100 Energy Meter is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• Rengjøring: Bruk en myk, tørr klut til å rengjøre målerens utside. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Undersøkelse: Kontroller ledningsforbindelsene regelmessig for tetthet og tegn på slitasje eller skade.
• Kalibrering: The meter is factory calibrated. Recalibration should only be performed by authorized service personnel if accuracy issues are suspected. The calibration date is visible on the device (e.g., "Calibrated 2023-02-10").

7. Feilsøking

Hvis du støter på problemer med energimåleren din, bør du vurdere følgende vanlige feilsøkingstrinn:

• Ingen visning: Check the power supply connections. Ensure the circuit breaker is on.
• Feil avlesning: Verify all wiring connections are correct according to the installation diagram. Ensure the meter is correctly configured for the electrical system (e.g., single-phase or three-phase).
• Kommunikasjonsproblemer: Ensure the IR communication adapter is correctly aligned with the meter's IR port and that its drivers/software are properly installed on the connected system.
• For persistent issues, contact ABB technical support.

8. Spesifikasjoner

9. Garanti og støtte

For warranty information and technical support, please refer to the official ABB website or contact your local ABB representative. Keep your purchase receipt and product serial number (visible on the device, e.g., 01774274) for any support inquiries.

Du kan besøke ABB-butikk på Amazon for mer produktinformasjon.