Progress Lighting P3408-0930K9

Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module Instruction Manual

Model: P3408-0930K9

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Progress Lighting P3408-0930K9 Fitter LED Flush Mount, Brushed Nickel finish.

Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.

Sikkerhetsinformasjon

ADVARSEL: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

  • Les alle instruksjoner nøye før installasjon.
  • Ensure the electrical supply is disconnected before handling the fixture.
  • All wiring connections must be in accordance with local and national electrical codes.
  • Ikke overskrid det angitte voltage (120 volt).
  • Denne armaturen er kun designet for innendørs bruk.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

  • LED Flush Mount Fixture (with integrated AC Module)
  • Glassskygge
  • Mounting Hardware Kit (screws, wire nuts, mounting strap)
  • Bruksanvisning

Nødvendig verktøy (ikke inkludert)

  • Phillips skrutrekker
  • Flatt skrutrekker
  • Trådstrippere
  • Tang
  • Elektrisk tape
  • Vernebriller

Oppsett og installasjon

Follow these steps to properly install your LED flush mount fixture:

  1. Slå av strømmen: Finn sikringsskapet eller sikringsskapet og slå av strømmen til koblingsboksen der armaturen skal installeres. Kontroller at strømmen er av med en volumsensor.tage tester.
  2. Forbered montering: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
  3. Kablingstilkoblinger:
    • Koble til svart ledningen fra armaturen til svart (varm) ledning fra koblingsboksen ved hjelp av en trådmutter.
    • Koble til hvit ledningen fra armaturen til hvit (nøytral) ledningen fra koblingsboksen ved hjelp av en trådmutter.
    • Koble til bakke ledningen fra armaturen til bakke wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
    • Stikk alle ledninger forsiktig inn i koblingsboksen.
  4. Fest armatur: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
  5. Installer glassskjerm: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
  6. Gjenopprett kraften: Slå på strømmen igjen ved sikringsskapet eller strømbryteren.
Dimensions of the Progress Lighting P3408-0930K9 Fitter LED Flush Mount.

Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.

Flush Mount Location Options

Bilde: Eksamples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.

Bruksanvisning

Once installed, operate your LED flush mount fixture as follows:

  • Slå på/av: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
  • dimming: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.
Illustration of dimmable functionality with a compatible wall dimmer.

Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.

Vedlikehold

The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:

  • Rengjøring: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
  • Undersøkelse: Inspiser armaturen regelmessig for tegn på skade eller løse forbindelser. Hvis det oppdages problemer, koble fra strømmen og kontakt en kvalifisert elektriker.

Feilsøking

Hvis du støter på problemer med armaturen din, kan du se følgende vanlige problemer og løsninger:

ProblemMulig årsakLøsning
Lyset tennes ikke.Ingen strøm til armaturet.
Løs ledningsforbindelse.
Sjekk effektbryter/sikring.
Ensure wall switch is on.
Koble fra strømmen og kontroller ledningsforbindelsene.
Lyset flimrer eller dimmes ikke riktig.Inkompatibel dimmerbryter.
Løse ledninger.
Sørg for at dimmeren er LED-kompatibel.
Koble fra strømmen og kontroller ledningsforbindelsene.
Fixture is humming.Inkompatibel dimmerbryter.Replace with an LED-compatible dimmer switch.

Spesifikasjoner

Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:

  • Modellnummer: P3408-0930K9
  • Merke: Fremdriftsbelysning
  • Farge: Børstet nikkel
  • Materiale: Legert stål, glass
  • Stil: Samtids
  • Lysarmaturform: Nær tak
  • Produktdimensjoner: 9.25 cm L x 9.25 cm B x 4.63 cm H
  • Innendørs/utendørs bruk: Innendørs
  • Strømkilde: Elektrisk med ledning
  • Installasjonstype: Flush Mount
  • Lyskildetype: Integrated LED (AC Module)
  • Antall lyskilder: 1
  • Voltage: 120 volt
  • Lys farge: Varm hvit (3000K)
  • Lysstyrke: 1211 lumen
  • Wattage: 17 watt
  • Fargegjengivelsesindeks (CRI): 90
  • Dimbar: Yes, with compatible wall dimmer
  • Montering nødvendig: Ja
  • Opprinnelsesland: Kina
  • UPC: 785247189168
LED specifications: 90 CRI and 3000K color temperature.

Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.

Garantiinformasjon

This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5 års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.

Kundestøtte

If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting webnettstedet eller gjennom forhandleren din.

Nettressurser: For ytterligere informasjon og støtte, besøk Progress Lighting-butikken på Amazon.

© 2023 Progress Lighting. Alle rettigheter forbeholdt.