Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

Introduksjon

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Viktig sikkerhetsinformasjon

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Koble alltid fra strømmen ved hovedsikringen før installasjon eller vedlikehold.
• Ikke installer denne lampen på våte steder. Den er kun beregnet for innendørs bruk.
• Sørg for at alle koblinger er sikre og ordentlig isolert.
• This fixture is designed for 120 Volts AC.
• Ikke forsøk å modifisere armaturen. Eventuelle modifikasjoner kan ugyldiggjøre garantien og skape en sikkerhetsfare.
• LED-lyskilden er integrert og kan ikke byttes ut av brukeren.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• Helm Collection LED Flush Mount Fixture (1)
• Monteringsmaskinvaresett (1)
• Installation Sheet (1)

Oppsett og installasjon

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Trinn 1: Forbered for installasjon

1. Slå av strømmen ved sikringsskapet eller sikringsbryteren for å unngå elektrisk støt.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Trinn 2: Monter armaturen

Bilde: Foran view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Fest monteringsbraketten til koblingsboksen med de medfølgende skruene. Sørg for at den er godt festet.
5. Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire (Live) from the fixture to the black wire from the junction box.
   • Koble den hvite ledningen (nøytral) fra armaturen til den hvite ledningen fra koblingsboksen.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Bruk trådmuttere for å sikre alle tilkoblinger og pakk dem inn med elektrisk tape for ekstra sikkerhet.
6. Stikk alle ledninger forsiktig inn i koblingsboksen.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Trinn 3: Fullfør installasjonen

8. Gjenopprett strømmen ved hovedsikringen.
9. Test armaturet for å sikre at det fungerer som det skal.

Bruksanvisning

This LED flush mount fixture is designed for simple operation.

• Slå på/av: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• dimming: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Vedlikehold

To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:

• Rengjøring: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• LED-lyskilde: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• Undersøkelse: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Feilsøking

Hvis du opplever problemer med armaturen din, kan du se følgende vanlige problemer og løsninger:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Spesifikasjoner

Garanti og støtte

Denne Progress Lighting-armaturen leveres med en 5 års begrenset garanti. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

Du kan også besøke den offisielle Progress Lighting-butikken på Amazon for mer informasjon og produkttilbud.