Progress Lighting P4558-20 Spirit lineær øylysekrone med to lyskilder brukerhåndbok

1. Introduksjon

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P4558-20 is a two-light linear island chandelier featuring light umber etched glass shades and an antique bronze finish, designed for indoor use.

2. Sikkerhetsinformasjon

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringsskapet eller sikringsbryteren før installasjon eller service.

• Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter, forordninger eller National Electric Code (NEC).
• Rådfør deg med en kvalifisert elektriker hvis du er usikker på installasjonsprosessen.
• Bruk kun UL/cUL-listede ledningskontakter.
• Ikke overskrid maksimumsverdientage specified for the fixture (100 watts per bulb).
• Håndter glasskomponenter forsiktig for å unngå brudd.
• Sørg for at armaturen er forsvarlig montert til et strukturelt element i taket.

3. Pakkens innhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Chandelier fixture assembly
• Mounting hardware (crossbar, screws, wire nuts)
• Glass shades (2)
• Installasjonsark

4. Oppsett og installasjon

Follow these steps carefully to install your chandelier. It is recommended to have a second person assist during installation due to the size and weight of the fixture.

Trinn 1: Forbered for installasjon

1. Slå av strømmen ved hovedsikringsbryteren eller sikringsskapet.
2. Pakk ut alle komponentene og legg dem ut på en ren, flat overflate.
3. Review the included installation sheet for any specific model details.

Trinn 2: Monter armaturen

1. Attach the mounting crossbar to the outlet box using the provided screws. Ensure it is securely fastened.
2. Determine the desired hanging height and adjust the suspension rods accordingly. The fixture uses rigid rods for suspension.
3. Carefully lift the fixture towards the ceiling, feeding the electrical wires through the center hole of the mounting crossbar.

Trinn 3: Elektriske tilkoblinger

1. Connect the bare copper ground wire from the fixture to the ground wire from the outlet box using a wire nut.
2. Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
3. Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
4. Ensure all wire connections are secure and tucked neatly into the outlet box.

Step 4: Secure the Fixture and Install Shades

1. Attach the fixture canopy to the mounting crossbar, securing it with the decorative nuts or screws provided.
2. Carefully place the light umber etched glass shades onto the fixture's lamp holders, securing them according to the specific design (typically with threaded rings).

Trinn 5: Installer lyspærer

1. Insert two (2) medium-base light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.

Figur 4.1: Fully assembled Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. This image shows the antique bronze frame, the two light umber etched glass shades, and the suspension rods extending upwards, ready for ceiling mounting.

Trinn 6: Gjenopprett strømmen

1. Gjenopprett strømmen til hovedsikringsbryteren eller sikringsskapet.
2. Test armaturen for å sikre at den fungerer som den skal.

5. Bruksanvisning

The Progress Lighting P4558-20 chandelier operates via a standard wall switch (not included) connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Note: This fixture is designed for use with a standard AC power source (120 Volts) and does not include an integrated control method like an app or push button as a primary control for the fixture itself, but rather refers to potential external control systems it might be compatible with.

6. Vedlikehold

Rengjøring

• Koble alltid fra strømmen før rengjøring.
• For å rengjøre armaturet, tørk av med en myk, tørr klut.
• Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• For glass shades, a mild glass cleaner can be used on a cloth, then wipe dry.

Bytte av pære

• Ensure power is off and bulbs have cooled before attempting to replace them.
• Unscrew the old bulb from the socket.
• Screw in a new medium-base bulb, ensuring it does not exceed 100 watts.

7. Feilsøking

8. Spesifikasjoner

• Modell: P4558-20
• Merke: Fremdriftsbelysning
• Materiale: Glass, metall
• Fullfør: Antik bronse
• Skyggemateriale: Etched Glass (Light Umber)
• Antall lyskilder: 2
• Wattage: 100 watts (max per bulb)
• Voltage: 120 volt
• Varevekt: 11.66 pund
• Montering nødvendig: Ja
• Monteringstype: Takfeste
• Mål (omtrentlige): Length: 36.00 in., Width: 13.12 in., Height: 23.62 in.

9. Garanti og støtte

This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Progress Lighting directly.

Produsent: HI- Progress Lighting

For further assistance, visit the official Progress Lighting webnettstedet eller kontakt deres kundeserviceavdeling.