Electron Microscopy Sciences 5800-DTH
Branson Ultra Sonic Bath Model 5800-DTH User Manual
Model: 5800-DTH | Brand: Electron Microscopy Sciences
Introduksjon
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of the Branson Ultra Sonic Bath Model 5800-DTH. Please read this manual thoroughly before operating the unit to ensure proper usage and to prevent damage or injury.
The Branson Ultra Sonic Bath Model 5800-DTH is an ultrasonic cleaner designed for laboratory and industrial applications. It features a digital timer, heater, degas function, and temperature monitoring capabilities. Its tank dimensions are 11.5 inches by 9.5 inches by 6 inches, with a capacity of 2.5 gallons (9.5 liters). The overall size of the unit is 15.6 inches by 15.8 inches by 14.9 inches.

Image: The Branson Ultra Sonic Bath Model 5800-DTH, a compact ultrasonic cleaner with a digital display and control panel on top, and a stainless steel tank.
Sikkerhetsregler
- Sørg alltid for at enheten er skikkelig jordet.
- Do not operate the unit without liquid in the tank.
- Use only approved cleaning solutions. Avoid flammable or corrosive liquids.
- Keep hands and foreign objects out of the tank during operation.
- Koble fra strømmen før du utfører vedlikehold eller rengjøring.
- Sørg for tilstrekkelig ventilasjon under drift.
- Ikke senk enheten i vann eller andre væsker.
Oppsett
- Utpakking: Carefully remove the ultrasonic bath from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
- Plassering: Place the unit on a stable, level, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation.
- Strømtilkobling: Connect the power cord to a grounded electrical outlet (110 V).
- Fylle tanken: Fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the minimum and maximum fill lines. Do not overfill.
- Degassing (Initial Use): For optimal performance, especially with fresh solutions, perform a degassing cycle. This removes dissolved gases from the liquid, which can interfere with ultrasonic cleaning efficiency.
Bruksanvisning
Grunnleggende operasjon
- Strøm på: Press the power button to turn on the unit. The digital display will illuminate.
- Set Temperature (if applicable): Use the temperature controls to set the desired cleaning solution temperature. Allow time for the heater to reach the set point.
- Still inn timer: Use the timer controls to set the desired cleaning duration. Typical cycles range from 5 to 30 minutes depending on the application.
- Plasser elementer: Carefully place the items to be cleaned into the cleaning basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom or sides of the tank.
- Start rengjøring: Press the start button to initiate the ultrasonic cleaning cycle. The unit will operate for the set duration and then automatically shut off.
- Fjern elementer: Once the cycle is complete, carefully remove the basket and rinse the cleaned items thoroughly with water.
Degas Function
The degas function rapidly removes dissolved gases from the cleaning solution, improving ultrasonic efficiency. Activate this function for approximately 5-10 minutes when using fresh solution or if cleaning performance seems reduced.
Temperaturkontroll
The integrated heater allows for precise temperature control of the cleaning solution. Optimal cleaning temperatures vary by application and cleaning solution type. Refer to your cleaning solution's instructions for recommended temperatures.
Vedlikehold
- Tømme tanken: Regularly drain and replace the cleaning solution. Use the drain valve located on the unit to empty the tank.
- Rengjøring av tanken: After draining, wipe the inside of the tank with a soft cloth to remove any residue. Do not use abrasive cleaners or scouring pads.
- Utvendig rengjøring: Rengjør utsiden av enheten med annonseamp Unngå å få vann i kontrollpanelet eller de elektriske komponentene.
- Filtervedlikehold (hvis aktuelt): Check and clean any integrated filters as per the schedule outlined in the full product manual (if applicable).
- Lagring: When not in use for extended periods, ensure the unit is clean, dry, and stored in a cool, dry place.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Enheten slås ikke på. | Ingen strømforsyning; defekt strømledning; intern sikring har gått. | Check power connection and outlet; inspect power cord; contact service for fuse replacement. |
| No ultrasonic action. | Insufficient liquid; air bubbles in solution (no degas); transducer issue. | Add more liquid; perform degas cycle; contact service. |
| Dårlige rengjøringsresultater. | Incorrect solution; insufficient temperature; overloaded tank; items not submerged. | Use appropriate solution; adjust temperature; reduce load; ensure full submersion. |
| Varmeapparat fungerer ikke. | Heater element failure; temperature sensor issue. | Kontakt service for reparasjon. |
Spesifikasjoner
- Modell: Branson Ultra Sonic Bath Model 5800-DTH
- Merke: Elektronmikroskopivitenskap
- Strømforsyning: 110 V
- Tank Dimensions (L x W x D): 11.5 cm x 9.5 cm x 6 cm
- Tankkapasitet: 2.5 liter (9.5 liter)
- Totale mål (L x B x H): 15.6 cm x 15.8 cm x 14.9 cm
- Funksjoner: Digital Timer, Heater, Degas Function, Temperature Monitor
- Produsent: EMS
- ASIN: B010NWGVJS
Garantiinformasjon
This Branson Ultra Sonic Bath Model 5500-DTH is covered by a standard manufacturer's warranty. For specific terms, duration, and conditions, please refer to the warranty card included with your product or contact Electron Microscopy Sciences directly. Keep your proof of purchase for warranty claims.
Kundestøtte
For technical assistance, spare parts, or service inquiries, please contact Electron Microscopy Sciences customer support. When contacting support, please have your model number (5800-DTH) and serial number (if applicable) ready.
Elektronmikroskopivitenskap
Visit the Electron Microscopy Sciences Store on Amazon
(Vennligst referer til tjenestemannen website or product documentation for direct contact information such as phone numbers or email addresses, as these are not provided in the current data.)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.