SOEHNLE PROFESSIONAL Compact Scale 9241 User Manual

Introduksjon

Thank you for choosing the SOEHNLE PROFESSIONAL Compact Scale 9241. This manual provides essential information for the correct setup, operation, and maintenance of your scale. Please read these instructions carefully before using the device to ensure safe and efficient operation and to achieve accurate weighing results. This model features a maximum capacity of 15 kg with a readability of 0.5 g, making it suitable for various professional applications.

Produkt overview og applikasjoner

1. Oppsett

1.1 Utpakking og inspeksjon

Carefully remove all components from the packaging. Inspect the scale for any signs of damage during transit. If any damage is found, do not use the scale and contact your supplier immediately.

1.2 Plassering

Place the scale on a stable, level, and vibration-free surface. Avoid locations with direct sunlight, extreme temperature fluctuations, or strong air currents (e.g., near air conditioning vents), as these can affect weighing accuracy.

1.3 Strømforsyning

The scale can be powered by the integrated battery or via the included 230 V plug-in power adapter. The integrated battery provides up to 70 hours of operation and features a charging function when connected to the power adapter.

• AC-drift: Connect the power adapter to the scale's power input and then to a suitable electrical outlet.
• Batteridrift: Ensure the integrated battery is sufficiently charged for portable use.

2. Bruksanvisning

2.1 Strøm på/av

• For å slå på: Trykk på PÅ/AV button. The display will show a self-test sequence and then settle at zero.
• Slik slår du av: Trykk og hold inne PÅ/AV knappen til skjermen slås av.

2.2 Grunnleggende veiing

1. Ensure the scale is powered on and the display shows "0.000 kg" or "0.0 g".
2. Place the item to be weighed directly onto the weighing platform.
3. Les vekten som vises på skjermen.

2.3 Tarafunksjon (T)

Tarafunksjonen lar deg trekke fra vekten av en beholder, slik at bare nettovekten av innholdet måles.

1. Plasser den tomme beholderen på veieplattformen.
2. Trykk på T (Tare) button. The display will reset to "0.000 kg" (or "0.0 g"), indicating the container's weight has been tared.
3. Legg varene som skal veies i beholderen. Displayet vil vise nettovekten til varene.
4. For å fjerne taraen, fjern beholderen fra plattformen og trykk på T knappen igjen, eller slå av og på vekten.

2.4 Zero Function (→0←)

The zero function is used to reset the display to zero when there is a small amount of residual weight on the platform or if the display drifts slightly from zero.

• With nothing on the platform, if the display shows a small non-zero value, press the →0← (Zero) button to reset it to "0.000 kg".

2.5 Tellefunksjon

This function allows you to count a large number of identical items by weighing a sample.

1. Place a known quantity of items (e.g., 10, 20, 50, 100) on the platform as a sample.
2. Access the counting mode (refer to the scale's specific button, often labeled PCS or similar, or a menu option).
3. Input the sample quantity. The scale will calculate the average piece weight.
4. Add the remaining items to be counted. The display will show the total count.

2.6 Summing Function

The summing function allows you to accumulate the weights of multiple items or batches.

1. Weigh the first item.
2. Trykk på M+ (Memory Plus) or SUM button to add the weight to the total.
3. Remove the item and place the next item to be weighed.
4. Repeat step 2 and 3 for all items.
5. Til view the total sum, press the MR (Memory Recall) or TOTAL knapp.

2.7 Checking Function

This function is used for checking if an item's weight falls within a predefined target range (checkweighing).

1. Enter the target weight and tolerance limits (upper and lower bounds) into the scale's settings.
2. Place an item on the platform.
3. The scale will indicate if the item is "under," "over," or "within" the target range, often with visual or audible alerts.

2.8 Hold-funksjon

The hold function allows the displayed weight to be frozen on the screen, even after the item is removed from the platform. This is useful for weighing large or awkwardly shaped items that might obscure the display.

• Plasser gjenstanden på plattformen.
• Trykk på HOLDE button. The weight will be locked on the display.
• Remove the item. The weight will remain displayed.
• Trykk på HOLDE button again to release the display and return to normal weighing mode.

3. Vedlikehold

3.1 Rengjøring

To maintain accuracy and prolong the life of your scale, regular cleaning is recommended.

• Always disconnect the scale from the power supply before cleaning.
• Wipe the weighing platform and housing with a soft, damp klut.
• Use mild cleaning agents if necessary. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface and internal components.
• Do not allow liquids to enter the scale's interior.

3.2 Batteristell

The integrated battery is designed for long-term use. To maximize battery life:

• Lad batteriet helt før første gangs bruk.
• If the scale will not be used for an extended period, charge the battery periodically (e.g., every 3 months) to prevent deep discharge.
• Oppbevar vekten på et kjølig, tørt sted.

3.3 Oppbevaring

When not in use, store the scale in its original packaging or a protective cover to prevent dust and damage. Ensure it is stored in a dry environment.

4. Feilsøking

5. Tekniske spesifikasjoner

6. Garanti og støtte

For warranty information, please refer to the warranty card included with your product or contact your point of purchase. For technical support or service inquiries, please contact SOEHNLE PROFESSIONAL customer service. Keep your purchase receipt as proof of purchase.

Produsent: Soehnle Industrial Solutions GmbH