midiplus Origin 37 USB MIDI Keyboard Controller User Manual

1. Introduksjon

The midiplus Origin 37 is a versatile USB MIDI Keyboard Controller designed for musicians and producers. It features 37 full-size sensitive keys, 8 real-time controller knobs, 9 real-time controller sliders, and essential performance controls like pitch bend and modulation wheels. This manual provides detailed instructions for setting up, operating, and maintaining your Origin 37 controller to ensure optimal performance and longevity.

2. Sikkerhetsinformasjon

• Ikke utsett enheten for regn, fuktighet eller ekstreme temperaturer.
• Unngå å plassere enheten i nærheten av varmekilder som radiatorer, varmeventiler, ovner eller andre apparater (inkludert ampløftere) som produserer varme.
• Bruk kun tilbehør/tilbehør spesifisert av produsenten.
• Rengjør kun med en tørr klut.
• Ikke blokker noen ventilasjonsåpninger. Installer i samsvar med produsentens instruksjoner.
• Beskytt strømledningen mot å bli tråkket på eller klemt, spesielt ved støpsler, stikkontakter og punktet der de kommer ut av apparatet.
• Koble fra dette apparatet under tordenvær eller når det ikke skal brukes i lengre perioder.

3. Pakkens innhold

Vennligst sjekk at alle varene som er oppført nedenfor er inkludert i pakken din:

• midiplus Origin 37 USB MIDI Keyboard Controller
• USB-kabel
• Brukerhåndbok (dette dokumentet)

4. Produktet er overview

Familiarize yourself with the various components and controls of your Origin 37 controller.

Figur 4.1: Ovenfra og ned view of the midiplus Origin 37, showing the 37 keys, pitch and modulation wheels, control knobs, sliders, and display.

4.1 Kontroller på frontpanelet

• 37 Full-Size Sensitive Keys: Standard piano-style keys for playing notes.
• Pitch Bend-hjul: Tillater sanntids tonehøydemodulering av noter.
• Modulasjonshjul: Provides real-time control over various assignable parameters, typically vibrato or other effects.
• Strømknapp: Slår enheten på eller av.
• Sustain Button: Toggles sustain on/off, mimicking a sustain pedal.
• Oktav opp/ned-knapper: Flytter klaviaturets oktavområde opp eller ned.
• Data Entry Slider: Used for adjusting parameter values shown on the display.
• MIDI/Select Button: Used to enter MIDI configuration mode or select options.
• Program Up/Down Buttons: Navigates through different program or preset numbers.
• 8 Real-Time Controller Knobs (1-8): Assignable rotary encoders for controlling various MIDI parameters.
• 9 Real-Time Controller Sliders (9-17): Assignable faders for controlling various MIDI parameters.
• LED display: Shows current parameter values, program numbers, and other status information.

Figure 4.2: Detail of the left-side controls, including Pitch Bend, Modulation, Power, Sustain, Octave Up/Down, Data Entry slider, and LED display.

Figure 4.3: Detail of the right-side controls, showing the 8 rotary knobs and 9 faders, along with key labels for MIDI configuration.

4.2 Tilkoblinger på bakpanelet

• Sustain Switch Input: 1/4-inch jack for connecting an external sustain pedal (not included).
• KEYBOARD MIDI OUT (5-pin DIN): Standard MIDI output for connecting to other MIDI devices.
• USB-port: For connecting to a computer (PC/Mac) for MIDI communication and power.
• Strømbryteren: Hovedstrømbryter for enheten.

Figure 4.4: Rear panel showing the Sustain Switch input, KEYBOARD MIDI OUT, USB port, and Power switch.

5. Oppsett

5.1 Koble til en datamaskin (USB)

1. Sørg for at datamaskinen er slått på.
2. Connect one end of the supplied USB cable to the USB port on the rear panel of the Origin 37.
3. Koble den andre enden av USB-kabelen til en ledig USB-port på datamaskinen.
4. The Origin 37 is USB class-compliant and does not require special drivers for most operating systems (PC/Mac). It will be powered via the USB connection.
5. Turn on the Origin 37 using the Power button on the front panel.
6. Your computer should automatically recognize the device. You can then select it as a MIDI input device in your Digital Audio Workstation (DAW) or music software (e.g., Ableton Live).

5.2 Connecting to External MIDI Devices (MIDI OUT)

1. Ensure both the Origin 37 and the external MIDI device are powered off.
2. Connect a standard 5-pin MIDI cable from the "KEYBOARD MIDI OUT" port on the Origin 37 to the MIDI IN port of your external MIDI device (e.g., synthesizer, sound module).
3. Power on the Origin 37, then power on your external MIDI device.
4. Configure your external MIDI device to receive MIDI data on the appropriate MIDI channel.

5.3 Koble til en sustainpedal

1. Connect a standard 1/4-inch TS (mono) sustain pedal (not included) to the "Sustain Switch" input on the rear panel.
2. The pedal will function as a sustain control for your MIDI notes.

6. Bruksanvisning

6.1 Grunnleggende betjening

• Spille tangenter: Simply press the keys to send MIDI note-on/note-off messages to your connected software or hardware. The keys are velocity-sensitive, meaning the harder you press, the higher the velocity value sent.
• Pitch Bend-hjul: Move the wheel up or down to bend the pitch of currently held notes. It automatically returns to the center position.
• Modulasjonshjul: Move the wheel to apply modulation effects. This wheel typically stays in the position you leave it. The specific effect controlled depends on your software or hardware instrument's settings.
• Sustain Button: Press to toggle sustain on or off. When active, notes will continue to sound after the key is released, similar to a piano's sustain pedal.
• Octave Up/Down: Use these buttons to transpose the entire keyboard up or down in octave increments. The LED display will indicate the current octave shift.
• Program Up/Down: These buttons are used to send MIDI Program Change messages, allowing you to switch between different sounds or presets on your connected MIDI device or software.

6.2 Assigning Knobs and Sliders

The 8 knobs and 9 sliders are assignable MIDI controllers. They send MIDI Control Change (CC) messages. The specific CC number each knob/slider sends can be configured. Refer to your software's or hardware's manual for how to map these CC messages to parameters.

To assign a knob or slider:

1. Trykk på MIDI/Select button to enter configuration mode.
2. Bruk Datainntasting slider or Octave Up/Down buttons to navigate through parameters on the LED display.
3. Select the desired knob or slider to assign.
4. Adjust the value (e.g., MIDI CC number) using the Datainntasting skyveknappen.
5. Pressen MIDI/Select again to exit configuration mode and save changes.

Note: Specific assignment procedures may vary. Consult the detailed MIDI implementation chart (if available) or your DAW's manual for advanced mapping.

6.3 Data Entry and Display

The LED display provides visual feedback for various settings and parameters. The Datainntasting slider is primarily used to adjust numerical values shown on this display, such as MIDI channel, CC numbers, or program numbers during configuration.

7. Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å rengjøre overflaten på enheten. Ikke bruk slipende rengjøringsmidler, voks eller løsemidler.
• Lagring: When not in use for extended periods, store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
• Håndtering: Unngå å miste enheten eller utsette den for harde støt.
• Makt: Always disconnect the USB cable when the unit is not in use or during electrical storms.

8. Feilsøking

9. Spesifikasjoner

10. Garanti og støtte

10.1 Garantiinformasjon

Midiplus products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Midiplus webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.

10.2 Kundestøtte

If you encounter any issues or have questions not covered in this manual, please contact Midiplus customer support. You can typically find contact information on the official Midiplus webnettstedet eller gjennom forhandleren din.

For ytterligere hjelp kan du besøke Midiplus Store on Amazon.