Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Produkt overview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Nøkkelfunksjoner:

• Energieffektivitet: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Lang levetid: Rated for 36,000 hours (based on 3 hours/day usage).
• Allsidig montering: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Mykt hvitt lys: Provides a comfortable ambiance for general room lighting.
• Dimbar: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Oppsett og installasjon

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Installasjonstrinn:

1. Sikkerhet først: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Klargjør monteringsoverflaten: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Koble til ledninger: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Festefeste: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Gjenopprett kraften: Når armaturen er forsvarlig montert og koblet til, gjenoppretter du strømmen ved sikringen.
6. Testfunksjonalitet: Slå på lysbryteren for å bekrefte at den fungerer som den skal.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Bruksanvisning

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Lys fargetemperatur:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Dimbar funksjonalitet:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Vedlikehold

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Rengjøring:

• Før rengjøring, sørg for at strømmen til armaturet er slått av med sikringen.
• Wipe the exterior of the fixture with a soft, damp klut.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Ensure the fixture is completely dry before restoring power.

Feilsøking

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Lyset slår seg ikke på:
  • Sjekk sikringen for å sikre at armaturen har strøm.
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Lysflimmer:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Se etter løse ledningsforbindelser.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 volt).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Spesifikasjoner

Garantiinformasjon

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 år for deler og arbeid fra kjøpsdatoen. Vennligst ta vare på kjøpsbeviset for garantikrav.

For warranty service or questions, please contact Philips customer support.

Kundestøtte

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webnettsted for kontaktinformasjon og støtteressurser.

Produsent: Philips belysning

Merke: Philips