NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. Produktet er overview

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

Nøkkelfunksjoner:

• Bluetooth Profile: A2DP (høy kvalitet, stereolyd)
• Bluetooth Core Specification: Version 4.0 with aptX
• Utganger: One Stereo Pair, Low-Level RCA Plugs
• Utgang Voltage: 2V RMS
• Signal til støy-forhold: 93 dB (20 Hz - 20 kHz)
• Vannmotstand: IPX67 rated for protection against dust and water immersion.
• Tilkobling: 3.5 mm lydinngang/-utgang.
• Fjernstart: Amplifier remote turn-on feature.

2. Sikkerhetsinformasjon

Les alle instruksjonene nøye før installasjon og bruk. Unnlatelse av å følge disse instruksjonene kan føre til produktskade, materielle skader eller personskade.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• Do not expose the device to extreme temperatures or direct flame.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken din:

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• 3.5 mm til RCA lydkabel
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. Oppsett og installasjon

4.1 Kablingstilkoblinger

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. Power (Red Wire): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. Jord (svart ledning): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. Fjernstyrt påslåing (blå ledning): Connect the blue wire to the remote turn-on input of your amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your amplifier eller hovedenhet.

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 Montering

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. Bruksanvisning

5.1 Bluetooth-paring

1. Ensure the VUBT2 is powered on (your audio system is active).
2. Naviger til Bluetooth-innstillingene på mobilenheten din (smarttelefon, nettbrett osv.).
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 Lydavspilling

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6. Vedlikehold

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• Rengjøring: Bruk en myk, damp cloth to wipe the exterior of the unit. Avoid harsh chemicals or abrasive cleaners.
• Vannmotstand: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• Tilkoblinger: Sjekk alle ledningsforbindelser med jevne mellomrom for å sikre at de er sikre og fri for korrosjon.

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7. Feilsøking

8. Spesifikasjoner

9. Garantiinformasjon

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX webnettstedet. Ta vare på kjøpsbeviset for garantikrav.

10. Kundestøtte

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• Online støtte: Visit the official NVX webnettsted for vanlige spørsmål, støtteressurser og kontaktinformasjon.
• Selgerstøtte: For purchase-related inquiries, contact the seller directly.