Legrand 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Modell: 067001 | Merke: Legrand

1. Introduksjon

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Sikkerhetsinformasjon

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Koble alltid fra strømmen ved hovedsikringen før du installerer eller utfører service på bryteren.
  • Sørg for at alle koblinger er sikre og ordentlig isolert.
  • Do not operate the switch with wet hands or in damp forhold.
  • Dette produktet er kun beregnet for innendørs bruk (IP20-klassifisering).
  • Ikke overskrid det angitte voltage (230V) or current (10A) ratings.

3. Pakkens innhold

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Oppsett og installasjon

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Strømfrakobling: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltage tester.
  2. Montering: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Kablingstilkoblinger:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Sikre modulen: Once wired, secure the switch module within its mounting frame or box.
  5. Installer frontplaten: Attach the decorative faceplate (not included) over the switch module.
  6. Gjenopprett kraften: Når installasjonen er fullført og alle komponentene er ordentlig på plass, gjenoppretter du strømmen ved hovedsikringen.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Bruksanvisning

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Slå på/av: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Lysende indikator: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Vedlikehold

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Rengjøring: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • Undersøkelse: Kontroller bryteren regelmessig for tegn på skade, løse tilkoblinger eller misfarging. Hvis det observeres problemer, koble fra strømmen og kontakt en kvalifisert elektriker.

7. Feilsøking

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Ingen strøm: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Bryteren svarer ikke: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Vedvarende problemer: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Spesifikasjoner

TrekkSpesifikasjon
Modellnummer067001
MerkeLegrand
Driftsvoltage230 volt
Nåværende vurdering10 A (10AX)
Effektvurdering1600 watt
DriftsmodusPÅ AV
BrytertypeTrykknapp
KontakttypeNormalt stengt
KoblingstypeKrymping
MaterialePlastic (housing), Copper (contact)
MonteringstypeWall Mount or Surface Mount
IP-vurderingIP20
Vekt6 gram
FargeGrå

9. Garanti og støtte

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand webnettsted: www.legrand.com

© 2023 Legrand. Alle rettigheter forbeholdt. Informasjon kan endres uten varsel.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.