Mares Smart Dive Computer 414129 User Manual

Introduksjon

The Mares Smart Dive Computer is designed for both recreational and advanced divers, offering a range of features for scuba and freediving. Its intuitive interface and clear display ensure essential dive information is readily available. This manual provides detailed instructions for the proper use and care of your Mares Smart Dive Computer.

Nøkkelfunksjoner inkluderer:

• Super Sharp and Clear Display: Ensures excellent readability of dive data.
• Perfect Ergonomics and User Friendliness: Designed for comfortable wear and easy navigation with two buttons.
• Multi-gas and Free Diving Capability: Supports various diving modes, including Nitrox with up to two gases.

Image: The Mares Smart Dive Computer displaying current time and dive parameters.

Teknologier

• Segmentvisning: Needle-sharp information combined with intelligent placement for easiest readability.
• Gas Switching: Allows setting the computer to include one or more oxygen-enriched gases (up to 99%) in addition to your main gas, benefiting from shorter decompression times by switching gases during the dive.
• Software Upgradeability: Keep the computer up to date with the latest Mares developments.
• Mineral Glass Display: Tempered glass provides superior scratch resistance and improved readability in all diving conditions and viewing vinkler.

Oppsett

1. Første oppstart og grunnleggende innstillinger

Upon first use or after a battery change, the computer will prompt you to set basic parameters. Use the two buttons to navigate and confirm selections.

• Språk: Velg ønsket språk.
• Enheter: Choose between metric (meters, Celsius) or imperial (feet, Fahrenheit) units.
• Tid og dato: Still inn gjeldende klokkeslett og dato.

2. Installasjon/bytte av batteri

The Mares Smart Dive Computer uses a user-replaceable battery. It is recommended to have battery changes performed by authorized Mares service centers to ensure proper sealing and water resistance. If replacing yourself, ensure the O-ring is clean and properly seated before closing the battery compartment.

Bruksanvisning

1. Navigasjon

The Mares Smart Dive Computer features two buttons for navigation. Typically, one button is used to scroll through options or increase values, and the other to select or decrease values. Refer to the on-screen prompts for specific actions.

2. Dykkemoduser

The computer supports multiple dive modes:

• Scuba Mode: For standard open-circuit diving. Features include current depth, maximum depth, dive time, no-decompression limit, and temperature.
• Freediving Mode: Optimized for apnea, with dedicated alarms for depth and time.
• Målermodus: Functions as a bottom timer, displaying current depth, dive time, and temperature without decompression calculations.

3. Gas Management (Nitrox)

The Smart computer can manage up to two Nitrox gases. Before each dive, ensure the oxygen percentage (O2%) and partial pressure of oxygen (PO2) limits are correctly set for each gas you plan to use. This allows for optimized decompression calculations and gas switching during the dive.

4. Loggbok

The logbook has a capacity of over 20 hours of dive profiles, recorded at 5-second intervals for scuba dives. Access the logbook to review past dives, including maximum depth, dive time, and surface intervals.

Vedlikehold

1. Rengjøring og lagring

After each dive, rinse the computer thoroughly with fresh water to remove salt, sand, and other debris. Allow it to air dry completely before storage. Store the computer in a cool, dry place away from direct sunlight and extreme temperatures.

2. Batteripleie

Monitor the battery indicator regularly. When the low battery warning appears, replace the battery promptly. For optimal performance and to maintain water resistance, it is highly recommended to have battery replacements performed by an authorized Mares service center. They will also check the integrity of the seals (O-rings) and perform a pressure test.

3. Programvareoppdateringer

Periodically check the Mares website for available software updates. Keeping your computer's firmware up to date ensures you have the latest features and performance enhancements.

Feilsøking

• Computer Not Turning On: Check the battery level. If the battery is low or depleted, replace it. Ensure the battery is correctly installed.
• Display Issues (e.g., missing segments): This may indicate a battery issue or internal fault. Try replacing the battery. If the problem persists, contact Mares customer support.
• Freedive/Bottom Time Lock: If the computer enters a locked state for freediving or bottom time, you can unlock it by entering the code "1234" on the erase screen. This action typically does not affect the dive log.
• Unøyaktige avlesninger: Ensure the computer's sensors are clean and free from obstructions. If readings remain inaccurate, contact Mares customer support for calibration or service.

Spesifikasjoner

Garanti og støtte

The Mares Smart Dive Computer is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims.

For technical assistance, service, or warranty inquiries, please contact Mares customer support or visit the official Mares website for a list of authorized service centers. Do not attempt to repair the device yourself, as this may void the warranty and compromise the device's water resistance.

Du finner mer informasjon og kontaktinformasjon på Mares Brand Store.