DYNAUDIO Emit M10 bokhyllehøyttaler bruksanvisning

Introduksjon

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Viktig sikkerhetsinformasjon

• Read these instructions thoroughly before operating the product.
• Ta vare på disse instruksjonene for fremtidig referanse.
• Følg alle advarsler på produktet og i bruksanvisningen.
• Følg alle instruksjoner.
• Ikke bruk dette apparatet i nærheten av vann.
• Rengjør kun med en tørr klut.
• Ikke blokker noen ventilasjonsåpninger. Installer i samsvar med produsentens instruksjoner.
• Ikke installer i nærheten av varmekilder som radiatorer, varmeelementer, ovner eller andre apparater (inkludert ampløftere) som produserer varme.
• Bruk kun vedlegg/tilbehør spesifisert av produsenten.
• Overlat all service til kvalifisert servicepersonell. Service er nødvendig når apparatet har blitt skadet på noen måte, for eksempel strømledning eller støpsel er skadet, væske har blitt sølt eller gjenstander har falt inn i apparatet, apparatet har vært utsatt for regn eller fuktighet, ikke fungerer normalt , eller har blitt droppet.

Pakkeinnhold

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Bruksanvisning (dette dokumentet)

Hvis noen gjenstander mangler eller er skadet, vennligst kontakt forhandleren din umiddelbart.

Oppsett

Høyttalerplassering

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Avstand fra vegger: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Høyde: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereotriangel: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Toe-in: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Bilde: Foran view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Bilde: Foran view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Kobler til en Amplivligere

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Slå av: Sørg for din ampApparatet er slått av og koblet fra stikkontakten før du foretar noen tilkoblinger.
2. Høyttalerkabler: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaritet: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Sikre tilkoblinger: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Bilde: Bak view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Betjening av høyttalerne

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Strøm på: Koble til og slå på amplivligere.
• Volumkontroll: Start med amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Innkjøringsperiode: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Griller: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Vedlikehold

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Rengjøring: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Griller: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Unngå direkte sollys og varme: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Fuktighet: Keep the speakers away from excessive moisture or humidity.
• Førerbeskyttelse: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Feilsøking

Hvis du støter på problemer med høyttalerne dine, kan du se følgende vanlige problemer og løsninger:

• Ingen lyd:
  • Sørg for at amplifier is powered on and connected correctly.
  • Sjekk alle høyttalerkabeltilkoblingene på begge amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your amplivligere.
  • Confirm the volume is turned up on the amplivligere.
• Forvrengt lyd:
  • Reduser volumnivået på din amplifier. Overdriving the speakers can cause distortion.
  • Sjekk høyttalerkabeltilkoblingene for løse tråder eller kortslutninger.
  • Sørg for at amplifier's power output is suitable for the speakers (refer to specifications).
  • Sjekk lydkilden for forvrengning.
• Svak bass:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Ujevne lydertage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Spesifikasjoner

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garanti og støtte

Garantiinformasjon

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYDenne garantien dekker material- og produksjonsfeil ved normal bruk. Vennligst ta vare på kjøpsbeviset for garantikrav.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webnettstedet.

Kundestøtte

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webnettstedet for ytterligere hjelp.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.