Crosley C200 Direct-Drive Turntable Instruction Manual

Introduksjon

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Viktige sikkerhetsinstruksjoner

• Les alle instruksjonene før bruk.
• Ta vare på denne håndboken for fremtidig referanse.
• Ikke bruk dette apparatet i nærheten av vann.
• Rengjør kun med en tørr klut.
• Ikke blokker noen ventilasjonsåpninger. Installer i samsvar med produsentens instruksjoner.
• Ikke installer i nærheten av varmekilder som radiatorer, varmeelementer, ovner eller andre apparater (inkludert ampløftere) som produserer varme.
• Beskytt strømledningen mot å bli tråkket på eller klemt, spesielt ved støpsler, stikkontakter og punktet der de kommer ut av apparatet.
• Bruk kun vedlegg/tilbehør spesifisert av produsenten.
• Koble fra dette apparatet under tordenvær eller når det ikke skal brukes i lengre perioder.
• Overlat all service til kvalifisert servicepersonell. Service er nødvendig når apparatet har blitt skadet på noen måte, for eksempel strømledning eller støpsel er skadet, væske har blitt sølt eller gjenstander har falt inn i apparatet, apparatet har vært utsatt for regn eller fuktighet, ikke fungerer normalt , eller har blitt droppet.

Pakkeinnhold

Ensure all items listed below are included in your package:

• Crosley C200 Direct Drive Turntable
• Brukerhåndbok (dette dokumentet)
• Støvdeksel
• Tallerken med drivrem
• Felt Slip Mat
• Motvekt
• Head Shell with Audio-Technica Magnetic Cartridge
• 45 RPM-adapter
• RCA Output Cables

Komponenter overview

Familiarize yourself with the main components of your turntable.

Oppsett

1. Installasjon av tallerken og drivrem

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Legg filtmatten oppå fatet.

2. Tone Arm Assembly and Balancing

1. Installer motvekt: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Fjern pennbeskytteren: Gently remove the clear plastic stylus protector from the cartridge.
4. Lås opp tonearmen: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Angi sporingskraft: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Sett Anti-Skate: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Koble til lydanlegg

1. Connect the RCA output cables from the turntable to your amplifier eller drevne høyttalere.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • PHONO: Use if your amplifier has a dedicated phono input.
   • LINJE: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Bruksanvisning

1. Spille av en plate

1. Plasser en plate på tallerkenen. Hvis du spiller en 45 RPM singel, bruk den medfølgende 45 RPM-adapteren.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Sørg for at platespilleren er slått på.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Søk etter "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/amplivligere.

Note: The Bluetooth feature is for receiving audio til the turntable, not for transmitting audio fra the turntable to Bluetooth speakers.

Vedlikehold

1. Rengjøring av pekepennen

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Rengjøring av platespilleren

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Unngå bruk av sterke kjemikalier eller skurende rengjøringsmidler.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Feilsøking

Spesifikasjoner

• Modell: C200A-BK
• Merke: Crosley
• Drive Type: Direkte kjøring
• Motor: Høyt dreiemoment
• Hastigheter: 33 1/3, 45 RPM
• Operasjon: Helmanuelt
• Tonearm: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Patron: Audio-Technica Magnetic Cartridge
• Før-amplivligere: Built-in switchable phono pre-amplivligere
• Utganger: Detachable RCA output cables
• Tallerken: Damped die-cast aluminum with felt slip mat
• Spesialfunksjon: Innebygd Bluetooth-mottaker
• Materiale: Aluminum (platter), Black finish
• Produktdimensjoner: 11.02 x 17.72 x 5.47 tommer
• Varevekt: 11.02 pund
• Kompatible enheter: Høyttaler, Amplifier, AV-mottaker

Garanti og støtte

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Produsent: Crosley

Dato først tilgjengelig: 22. desember 2015

Offisielle produktvideoer