Invision HDTV-DXL Ultra Strong TV Wall Bracket Instruction Manual

1. Introduksjon

Thank you for choosing the Invision HDTV-DXL Ultra Strong TV Wall Bracket. This double-arm, tilt and swivel mount is designed to securely hold 37-75 inch LED, LCD, OLED, Plasma, and Curved Screens, supporting up to 50kg. Manufactured from high-strength cold rolled carbon steel, it offers robust support and flexible viewing options. This manual provides detailed instructions for safe installation, operation, and maintenance of your TV wall bracket.

Image: The Invision HDTV-DXL TV Wall Bracket securely mounted, providing an optimal viewing experience in a home setting.

2. Sikkerhetsinformasjon

ADVARSEL: Improper installation or use of this product can result in serious injury or damage. Please read and understand all instructions before beginning installation.

• Ensure the wall structure can safely support the combined weight of the mount and your TV.
• Do not exceed the maximum load capacity of 50kg (110 lbs).
• Always use appropriate safety equipment, including eye protection and gloves, during installation.
• Hvis du er usikker på noen del av installasjonsprosessen, bør du kontakte en kvalifisert fagperson.
• Oppbevar alle komponentene utenfor barns rekkevidde.

3. Pakkens innhold

Før installasjon, kontroller at alle komponenter er til stede og uskadet:

• Invision HDTV-DXL TV Wall Bracket Assembly
• Hardware Kit (various M6 and M8 TV mounting screws, wall fixtures for wood and masonry)
• vater
• Installasjonsveiledning (dette dokumentet)

Note: Some TVs may require different sizes of bolts not included in the standard hardware kit. Please check your TV's manual for specific bolt requirements.

4. Oppsett og installasjon

This section outlines the steps for securely mounting your Invision TV wall bracket. It is recommended to have assistance during certain stages due to the weight and size of the bracket and TV.

4.1. VESA-kompatibilitetskontroll

Ensure your TV's VESA mounting pattern is compatible with the HDTV-DXL bracket. This bracket supports VESA patterns from 200x200mm up to 600mm (width) x 400mm (height).

Image: A detailed diagram illustrating VESA mounting hole measurements and the bracket's compatible dimensions for TVs between 37 and 75 inches.

1. Measure the distance from the top mounting hole to the bottom mounting hole (centre to centre) for the height.
2. Measure the distance between the two top mounting holes (centre to centre) for the width.
3. This is your TV's VESA measurement.

4.2. Veggforberedelse

Identify the ideal mounting location. Use a stud finder to locate wall studs if mounting on a wooden stud wall. For masonry or concrete walls, ensure you have the correct drill bits and wall plugs.

4.3. Feste veggplaten

Position the wall plate at the desired height and use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes. Drill pilot holes according to the recommended size for your wall type. Secure the wall plate using the provided wall fixtures.

Image: An illustration highlighting the robust construction of the Invision HDTV-DXL, including its reinforced wall panel and double-arm design for enhanced strength and stability.

4.4. Feste TV-braketter til TV-en

Carefully lay your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your TV using the appropriate M6 or M8 screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.

4.5. Montering av TV-en på veggplaten

With assistance, carefully lift the TV and hook the attached TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten any locking screws or mechanisms to prevent accidental dislodgement.

5. Bruk av festet

The Invision HDTV-DXL offers full motion capabilities for an optimized viewopplevelse.

5.1. Extending and Retracting

Gently pull or push the TV to extend it from the wall or retract it. The mount allows extension from a minimum of 58mm to a maximum of 500mm from the wall.

Image: An illustration demonstrating the ultra-slim profile (58mm) when retracted and the impressive maximum reach (500mm) of the Invision HDTV-DXL TV wall bracket.

5.2. Swiveling

The mount allows for up to 160° horizontal full motion swiveling (left to right), depending on your TV size. Gently push the TV to the desired angle.

5.3. Tilting

Adjust the vertical tilt angle from -5° to +8° to eliminate glare and achieve the perfect viewing angle. The tilt mechanism can be adjusted by hand after setting the nut and bolt torque, and can also be locked in place.

Image: A visual representation of the tilt functionality, allowing adjustment from -5 degrees to +8 degrees for optimal viewing and glare reduction.

5.4. Kabeladministrasjon

Utilize the integrated cable concealment panels to route and hide your TV cables, ensuring a clean and organized appearance while preventing cable snagging during movement.

Image: An illustration demonstrating the integrated cable management panels, designed to safely and stylishly conceal cables, enhancing both safety and aesthetics.

6. Vedlikehold

Regular maintenance ensures the longevity and safe operation of your TV wall bracket.

• Rengjøring: Tørk av festet med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Undersøkelse: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or frequent adjustments may cause them to loosen.
• Smøring: The moving parts are designed for smooth operation. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to pivot points, avoiding contact with electrical components.

7. Feilsøking

If you encounter any issues with your Invision TV wall bracket, refer to the following common problems and solutions:

8. Spesifikasjoner

9. Garanti og støtte

Invision products are designed for durability and performance. For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official Invision webnettstedet.

For further assistance or technical queries, please contact Invision customer support. When contacting support, please have your model number (HDTV-DXL) and purchase details ready.