1. Introduksjon
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Figur 1: Foran view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Viktig sikkerhetsinformasjon
Følg følgende sikkerhetsregler for å forhindre skade eller skade på produktet:
- Ikke forsøk å demontere eller modifisere låsen utover instruksjonene i denne håndboken.
- Bruk kun den angitte batteritypen (4 AA-batterier). Ikke bland gamle og nye batterier eller forskjellige typer batterier.
- Keep all components, especially small parts, out of reach of children.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Beskytt tastaturet mot overdreven fuktighet eller direkte vanneksponering.
3. Pakkens innhold
Kontroller at alle komponenter er til stede før installasjonen starter:
- Utvendig tastaturmontering
- Interior Assembly (Turn Knob)
- Deadbolt Lås
- Streikeplate
- Monteringsplate
- Monteringsskruer
- Nøkler (2)
- SmartKey Learning Tool
- Installasjonsveiledning / Boremal
Figur 2: Side view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Installasjonsinstruksjoner
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Klargjør døren: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Installer låsen: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Installer utvendig tastatur: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Installer monteringsplate: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Koble til kabler: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- Installer innvendig montering: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Installer batterier: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Testoperasjon: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Programmeringsinstruksjoner
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Innstilling av masterkoden
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Enter a new 4-8 digit Master Code.
- Press the "Lock" button.
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Adding User Codes
You can store up to 6 unique user codes for access.
- Enter your Master Code.
- Press the "Program" button.
- Press "1" (for adding a user code).
- Enter a new 4-8 digit User Code.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Deleting User Codes
- Enter your Master Code.
- Press the "Program" button.
- Press "2" (for deleting a user code).
- Skriv inn brukerkoden du vil slette.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- Slik aktiverer du: Enter Master Code, press "Program", press "3", press "Lock".
- For å deaktivere: Enter Master Code, press "Program", press "4", press "Lock".
6. Bruksanvisning
6.1. Låsing av døren
- Fra utsiden: Press the "Lock" button on the keypad. The deadbolt will extend.
- Fra interiøret: Rotate the turn knob to the locked position.
6.2. Låse opp døren
- Bruk av brukerkode: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
- Bruk av en nøkkel: Insert the key into the keyhole and turn to unlock.
- Fra interiøret: Rotate the turn knob to the unlocked position.
7. Vedlikehold
7.1. Batteribytte
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- Fjern batteridekselet på den indre enheten.
- Ta ut de gamle batteriene.
- Sett inn 4 nye AA alkaliske batterier, og sørg for riktig polaritet (+/-).
- Sett på batteridekselet.
Note: Replacing batteries does not erase programmed codes.
7.2. Rengjøring
Rengjør låsen med en myk klutamp klut. Unngå slipende rengjøringsmidler eller løsemidler, da disse kan skade overflaten og de elektroniske komponentene.
7.3. SmartKey Rekeying
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Låsen reagerer ikke på tastaturinntasting. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| Deadbolt kjører ikke helt ut eller inn. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Automatisk låsefunksjon fungerer ikke som forventet. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| Kan ikke programmere nye koder. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Produktspesifikasjoner
- Modell: 9GED14600-101
- Merke: Weiser
- Låstype: Tastatur elektronisk deadbolt
- Materiale: Messing
- Farge: Gull
- Dimensjoner (L x B x H): 6 x 11.13 x 4 tommer
- Varevekt: 2.4 pund
- Strømkilde: 4 AA-batterier (ikke inkludert)
- Spesialfunksjon: Battery Indicator, SmartKey Rekeying
- Baksett: Justerbar 2-3/8" eller 2-3/4"
- Bore Hole: 2-1/8"
- Brukerkoder: Opp til 6
- ANSI/BHMI Rating: Karakter 3
10. Garanti og kundestøtte
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser webnettstedet eller i produktemballasjen.
Weiser Official Webnettsted: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.