Bruksanvisning for Amazon Basics GF-50201M rullestol

Introduksjon

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics GF-50201M Rolling Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Sikkerhetsinformasjon

Viktig: Adhere to all safety guidelines to prevent injury or damage.

• Ikke overskrid den maksimale vektkapasiteten på 124.74 kg.
• Sørg for riktig montering av alle komponenter før bruk.
• Use the chair on a hard, level floor surface for optimal stability and mobility.
• Regularly inspect all parts for wear or damage. Discontinue use if any damage is found.
• Hold små deler unna barn under montering.

Pakkeinnhold

Kontroller at alle komponenter er til stede før monteringen starter:

• Ryggpute
• Setepute
• Seteplate
• Gassheis
• Base
• Hjul (5 stk.)
• Monteringsutstyr (skruer, skiver, unbrakonøkkel)

Oppsett og montering

Follow these steps for quick and easy assembly. An Allen wrench is included for all necessary fastenings.

Trinn 1: Fest hjulene til basen

Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.

Image: The five-star base with casters inserted.

Trinn 2: Sett gassløfteren inn i basen

Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.

Step 3: Attach Seat Plate to Seat Cushion

Align the seat plate with the pre-drilled holes on the underside of the seat cushion. Use the provided screws and Allen wrench to securely fasten the plate. Ensure the adjustment lever faces the front of the seat.

Image: Close-up of the seat adjustment lever mechanism.

Step 4: Attach Back Cushion to Seat Assembly

Connect the back cushion support to the seat plate using the remaining screws and Allen wrench. Tighten all screws firmly but do not overtighten.

Bilde: Bak view of the chair showing the mesh back and connection points.

Trinn 5: Plasser det monterte setet på gassløfteren

Carefully place the assembled seat (with the seat plate attached) onto the top of the gas lift cylinder. The seat will settle into place once weight is applied.

Montering Video

Video: Official Amazon Basics assembly guide for the Low-Back Computer Chair. This video demonstrates the step-by-step process of putting the chair together, from attaching the casters to securing the seat and backrest.

Bruksanvisning

Setehøydejustering

To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, lift your weight off the seat and pull the lever upwards. Release the lever at your desired height.

Image: A hand demonstrating the use of the pneumatic seat height adjustment lever.

Swivel and Mobility

The chair features a 360-degree swivel function, allowing for easy rotation. The smooth-rolling casters provide effortless movement across hard floor surfaces.

Image: A person comfortably seated in the Amazon Basics desk chair, illustrating its use in an office setting.

Vedlikehold

To maintain the appearance and functionality of your chair:

• Rengjøring: Tørk av med annonseamp klut. Unngå sterke kjemikalier eller slipende rengjøringsmidler.
• Undersøkelse: Sjekk alle skruer og tilkoblinger med jevne mellomrom for å sikre at de sitter godt fast. Stram til etter behov.
• Hjul: Hold hjulene fri for rusk for å sikre jevn rulling.

Feilsøking

Spesifikasjoner

Image: Diagram illustrating the dimensions of the Amazon Basics Rolling Desk Chair.

Garanti og støtte

For warranty information or customer support, please refer to the Amazon Basics official webnettstedet eller kontakt Amazons kundeservice direkte. Ta vare på kjøpskvitteringen for eventuelle garantikrav.