Universal Office Chair Assembly Manual

1. Viktig sikkerhetsinformasjon

Les alle instruksjonene nøye før montering og bruk. Ta vare på denne håndboken for senere referanse.

• Sørg for at alle deler er til stede og uskadet før monteringen starter. Ikke bruk hvis noen deler mangler eller er skadet.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Ikke stram skruene for hardt under montering, da dette kan skade komponentene.
• Hold barn og kjæledyr unna monteringsområdet. Små deler kan være en kvelningsfare.
• Only use the chair for its intended purpose.
• Ikke stå på stolen.

2. Pakkens innhold

Verify that all components listed below are included in your package.

3. Monteringsinstruksjoner

Follow these steps carefully to assemble your office chair.

1. Fest hjulene til stjernebasen: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Sett inn gassløft: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Fest mekanismeplaten til setet: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Fest armlenene til setet: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Koble seteenheten til gassløfteren: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Bruksanvisning

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Høydejustering: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Vippelås/opplåsing: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Tilt spenning: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Vedlikehold

Regular maintenance will prolong the life of your office chair.

• Rengjøring: Tørk overflater med en myk, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Festekontroll: Sjekk regelmessig alle skruer og bolter for å sikre at de er strammet. Stram til om nødvendig.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Smøring: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Feilsøking

Se denne delen for løsninger på vanlige problemer.

7. Spesifikasjoner

Key technical details of your office chair.