One For All TV Bracket WM4411 Instruction Manual

Introduksjon

This manual provides essential information for the safe and proper installation and use of your One For All TV Bracket WM4411. This fixed wall mount is designed for televisions with screen sizes from 32 to 60 inches and is compatible with various VESA mounting patterns. Please read all instructions carefully before beginning installation.

Sikkerhetsinformasjon

• Always read and understand all instructions before installation. If you have any doubts, consult a qualified professional.
• Ensure the wall structure can safely support the combined weight of the mount and your television.
• Do not exceed the maximum weight capacity of 1000kgs (2200 lbs) for this mount.
• Use only the provided mounting hardware or appropriate alternatives for your specific wall type.
• Keep all small parts and packaging materials out of reach of children.
• Bruk passende verneutstyr, for eksempel øyebeskyttelse, under installasjonen.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• Wall Mount Assembly (Wall Plate and TV Brackets)
• Mounting Kit (various screws, washers, spacers, concrete anchors)
• Bruksanvisning

Note: Specific quantities of fasteners may vary. Refer to the detailed parts list in your physical manual for exact counts.

Oppsett (installasjonsveiledning)

The One For All Toolbox App is available for easy setup and provides additional installation tools.

An image showing the black metal frame of the One For All WM4411 fixed TV wall mount, designed to securely hold televisions against a wall. It features a rectangular wall plate with multiple mounting holes and two vertical TV brackets with various VESA-compatible holes.

1. Forbered veggen:
   • Locate suitable mounting points (wood studs for drywall, solid concrete/brick).
   • Use a stud finder to confirm stud locations if mounting to drywall.
   • Mark the desired height and center of your TV on the wall.
2. Monter veggplaten:
   • Hold the wall plate against the wall at the marked location and use a spirit level to ensure it is perfectly horizontal.
   • Merk borepunktene gjennom hullene på veggplaten.
   • Drill pilot holes according to the recommended drill bit size for your wall type and chosen fasteners.
   • Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached.
3. Fest braketter til TV:
   • Plasser TV-en forsiktig med forsiden ned på en myk, ren overflate.
   • Identifiser VESA-monteringshullene på baksiden av TV-en.
   • Select the correct size screws, washers, and spacers from the mounting kit that fit your TV's VESA pattern (e.g., 100x100, 200x200, 400x400).
   • Attach the two vertical TV brackets to the back of your TV, ensuring they are oriented correctly and securely tightened.
4. Monter TV-en på veggplaten:
   • Løft TV-en forsiktig opp med de medfølgende brakettene, og hjelp ham med det.
   • Hekt TV-brakettene fast på den øvre kanten av veggplaten.
   • Senk TV-en forsiktig til brakettene sitter helt fast i veggplaten.
5. Fest TV-en:
   • Locate the safety screws or locking mechanisms at the bottom of the TV brackets.
   • Tighten these screws or engage the locking mechanisms to secure the TV to the wall plate and prevent accidental dislodgement.

Drift

Once installed, the One For All WM4411 is a fixed wall mount, meaning it holds your TV securely in a static position close to the wall. There are no moving parts for adjustment. Ensure the TV is properly seated and secured to the wall plate as per the installation instructions.

Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å tørke av festet. Unngå slipende rengjøringsmidler eller løsemidler.
• Periodiske kontroller: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
• Skader: Hvis noen del av festet ser ut til å være skadet eller slitt, må du ikke bruke det. Kontakt kundestøtte for å få hjelp.

Feilsøking

TV is not level after installation:

Ensure you used a reliable spirit level during the wall plate mounting step. If the TV is slightly off, you may need to adjust the wall plate or re-drill if necessary. Do not rely solely on included spirit levels; cross-reference with a trusted tool.

Mount feels loose on the wall:

This indicates improper installation. Immediately remove the TV. Re-check your wall type and ensure you used the correct anchors and fasteners. Verify that all screws are fully tightened into solid structural elements (studs, concrete). If unsure, consult a professional installer.

Missing parts from the mounting kit:

Contact One For All customer support or the retailer where you purchased the product to request replacement parts.

Spesifikasjoner

Garanti og støtte

For warranty information and technical support, please refer to the official One For All website or contact their customer service directly. You can also utilize the One For All Toolbox App for additional assistance and resources.

Besøk En for alle-butikken for flere produkter og informasjon.